Homebrew Beer Recipes | Page 14747 | Browse 295,000+ at Brewer's Friend

Author:

CJ White

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.025

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: -15.24 psi

Creation Date: 12/9/2019 4:39 AM

Notes: This keto friendly all grain brew clocks in at around 100 calories and less than 5g carbs per 12 oz serving. (at least according to calculator at http://www.mrgoodbeer.com/carb-cal.shtml)
--
I am currently brewing my first batch, and it's about ready to be kegged. More updates to follow.

It's kegged and first impressions are positive. Will update again once its been carbonated and sampled by some friends and family.

After sharing it around some and drinking it myself for a few months I have to see this is an all around pleasant beer considering the carb constraints. The carbonation seemed laking in the beginning, but after fiddling with the gas tank about its really dialed in and delightful.
--
1. Treat 7.5 gallons
2. Add 2-Row and Dextrose to mash tun
3. Strike mash with 1.5 gallons of 155 deg water. Mash 60 minutes, stirring occasionally.
4. Vorlauf.
5. Add 6 gallons 155 deg water to sparge.
6. Bring to Boil, add 1oz of hops after 15 minutes, and another oz in the last 5 min. Boil 60 minutes total.
7. Transfer to fermenter and chill below 72 deg.
8. Aerate and add yeast nutrient, stir.
9. Pitch Yeast and add Amylase Enzyme.
10. Cold Crash the fermentation and keg it. Set the c02 to 12psi to promote carbonation for the next week or so.
11. Turn the psi down to about 5. Enjoy a pint.

Author:

Argusbryggd

Boil Size: 12.5 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 80

Mash Thickness: 1.6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/7/2015 7:00 PM

Notes: Since "Leffe Brune" is one of my favorite beer.
I have tried to clone it for a while.
I have now created a recipe that is incredibly similar.
I can not distinguish between the beer in a test.
Smoked malt gives the taste of pine tar, and that use of
Safbrew T-58 provides a high FG, allowing that the sweetness remains.
All malts are from Weyermann.

Author:

vegas2k

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 30 psi

Creation Date: 2/16/2020 4:21 AM

Notes:

Author:

cullenmcdermott

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/28/2014 1:52 PM

Notes:

Author:

Redleg Ed

Boil Size: 6.6 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 78

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 66 ° F

Priming Method: Kegging

Priming Amount: 15 PSI CO2

Creation Date: 2/20/2017 10:20 PM

Notes: Loosely based on Lorena "Yooper" Evans, http://www.homebrewtalk.com/showthread.php?t=210376 and inspired by Oskar Blues "death by Coconut." Tweaked using a different yeast, and a different grain bill. Tried using cold steep roast & crystal in 1 gallon room temp water. Rinsed & squeezed to get a total of 2-3 qts of dark brew to add to kettle near flame out. Didn't add as much flavor as I wanted. Also, flaked coconut is a royal PITA. Will use coconut extract next time. Will try 1st recipe with 6.5# MO + .5# GP, then switch to 7.0# GP. Will ferment using STC1000+ ALE PROFILE (Pr4)(16+ days)
Pitch yeast @ <70°
SP0: 66°
dh0: 120 (5 day ferment)
SP1: 66°
dh1: 24 (1 day ramp up)
SP2: 72°
dh2: 72 (3 day ferment/D-rest)
SP3: 72°
dh3: 48 (2 day ramp down)
SP4: 36° (Crash, fine, and keg)
dh4: 0

Author:

BrewGirl

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: sugar

Priming Amount: N/A

Creation Date: 5/9/2013 4:09 PM

Notes:

Author:

Bakke Brygg

Boil Size: 29 Litres

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 76

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: Sukkerlake

Priming Amount: 6,5 g sukker/l

Creation Date: 1/13/2015 2:32 PM

Notes: Mengden meske- og skyllevann du bør bruke kommer an på utstyret og metoden du brygger med. Som et anslag kan vi si at du kan bruke 20 l meskevann og 14,5 l skyllevann til dette ølet. Noen bryggemaskiner (f.eks. Speidel Braumeister) kan kreve større mengder meskevann. Sjekk alltid manualen på utstyret du bruker.

Mesking på 67 grader i 60 min. Utmesk på 77 grader i 5 min hvis du har mulighet til å øke temperatur i mesken.

Kjøl ned til 17 grader før pitching av gjær.

Gjæring på 18 grader til stormgjæring begynner å avta (typisk etter 3-5 dager). Øk deretter til 20 grader og hold resten av gjæringsperioden (totalt 14 dager).

Gjæralternativer: WLP001, WLP007, WLP008, WLP051, WLP090, Danstar Nottingham

Author:

tcanova

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/21/2011 2:09 AM

Notes: Using Safale 04 yeast strain on this for a beer with Wit beer ingredients and regular ale yeast. Corriander and Marmalade were added at 10 minutes til end of boil and 5 Min. til end of boil.

Author:

Zellner

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 13.5

Efficiency: 70

Mash Thickness: 1.33

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/4/2014 1:49 PM

Notes: Fermentation Temp start at 62 up 68
FG 4 P

Author:

Herr Braumeister

Boil Size: 7.28 Gallons

Boil Time: 75

Boil Gravity: 1.036

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/28/2018 11:31 PM

Notes: Mash at 150.

Could use malted or flaked wheat instead of torrified.
Could substitute Challenger hops for Pilgrim.
Could substitute Simcoe or Columbus for Summit.

Author:

fire442

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/1/2012 3:21 AM

Notes: 1700ml starter used with 2 packages of yeast.

Author:

KevBeer

Boil Size: 27 Litres

Boil Time: 45

Boil Gravity: 1.056

Efficiency: 74

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/28/2017 7:55 PM

Notes: All grain method for Braumeister 20l, efficiency 73/75 %
Total Water: 38l

25l to mash / Mash PH 5.4/5.5
3l to sparge

Ontario Peaches, well mashed (liquide) added after boilling st 80c.

Aerate the wort with pure oxygen 70 sec.

Résultats:
Smal problème with hops dust Still un the botom if the keg... Will try to let hops inflate in a bit of cold boiled water before dry hops...

REALY good Neipa, better than Boréal nord est! Very cloudy, hoppy and fruity.

Author:

browers

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 60

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/1/2015 5:22 PM

Notes: Leva reutilizada de la dry stout
516.000.000 x mL

Author:

thehaze

Boil Size: 1500 Litres

Boil Time: 75

Boil Gravity: 1.041

Efficiency: 79

Mash Thickness: 2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/5/2017 9:53 AM

Notes:

Author:

freudian_sips

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 66

Mash Thickness: 3.17

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 50 ° F

Priming Method: Corn Sugar

Priming Amount: 5.16oz

Creation Date: 3/29/2019 7:25 PM

Notes: Use the Brulosophy Lager Method

7 days of primary at 50 degrees F

Raise to 68 degrees for dry hopping and D rest for 4-10 days

Drop to 8 degrees every 12 hours until 30-32 degrees. Hold for a week or more.

Keg, prime with Corn Sugar, enjoy!

Author:

El Día de la Cerveza

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: Carbonatación Forzada con Co2

Priming Amount: N/A

Creation Date: 7/26/2018 7:50 PM

Notes: Seguir los procesos que hemos dejado en el vídeo de nuestro canal YouTube.

SOBRE EL AGUA a usar para esta cerveza. Se puede usar como agua BASE: el agua de Bronchales (agua embotellada de mineralización muy débil) que podéis comprar en Mercadona. Esta agua tiene una composición de Calcio 3mg/l, Magnesio 3mg/l Sodio 1 mg/l, Cloruro 1 mg/litro, Sulfato 4 mg/litro y 22 mg/litro de Bicarbonatos.

Primero debemos tratar toda el agua a emplear con las sales necesarias para obtener el perfil de agua final deseado para nuestra IPA, en nuestro caso 41,9 litros: 15,9 litros para maceración y 26 para aspersión. Añadiendo a todos estos litros de Agua de bronchales lo que explicamos a continuación, conseguimos el perfil de agua ideal que apuntamos y aparece en la receta:

-11 gramos de Gypsium/Yeso
-3 mililitros de Cloruro Cálcico...puede que tengamos el cloruro en disolución al 33 % en ese caso tendríamos que añadir 9 mililitros, si lo tenemos en polvo son 3 gramos.
-1 gramo de sal común no yodada.

Añadimos todo esto a TODA el agua de Bronchales que vamos a emplear como primer paso en el día de elaboración de cerveza, o incluso el día de antes, e integramos bien. No se por que en receta aparece que las adiciones de sales son solo para el Mash...y no sé cambiarlo. Las adiciones de sales son para toda el agua, insisto.

Según mis cálculos en macerado al añadir las maltas a los 15,9 litros de agua tratada, tendríamos un PH de 5,7 que es muy alto, por lo cual tendríamos que añadir ácido y según mis cálculos añadiríamos 2,72 mililitros de Ácido Fosfórico (el que tengo yo, está al 75 % de potencia) a los 15,9 litros de agua que vamos a utilizar en macerado. Esto nos daría un PH en macerado del 5,4 al añadir las maltas, que es ideal para una Ipa.

En el agua de lavado los 26 litros tendremos un PH de 6 y según mis cálculos tendremos que añadir 0,5 mililitros de Ácido Fosfórico (al 75 % de fuerza) para tener un agua de lavado de 5,4 Ph....que es lo deseable.

Todos los cálculos del agua es usando el Agua Bronchales y usando las maltas exactas que constan en la receta, si buscamos maltas sustitutas deberíamos afinar el calculo. Todos los calculos los he realizado con la calculadora del agua de Brewers Friends. En este link podeis encontrar los cálculos realizados:

https://www.brewersfriend.com/mash-chemistry-and-brewing-water-calculator/?id=X16N07Z

Levadura necesaria: 23 gramos de Safale US5 (2 sobres) o bien 11.5 gramos (un sobre) y hacer un starter (si sabéis hacerlo) para conseguir 211 B de células necesarias y que faltan.

Dry Hopping siguiendo los pasos de nuestro vídeo en Youtube: Dry Hopping en 3 adiciones después del periodo de frío. Al finalizar: Carbonatacion con CO2.

Aunque nosotros hacemos el Dry Hopping después del periodo de frío, también se puede realizar el Dry Hopping en 3 adiciones una vez acabada la fermentación y descanso de diacetilo: se baja temperatura a 14 grados y se realiza el Dry Hopping en 3 adiciones según las indicaciones del mencionado vídeo (mismo sistema). Al acabar se realiza el periodo de frío, y al finalizar este periodo trasvase a Corni para carbonatación con Co2.

Si no carbonatamos con CO2, esta Ipa no quedará tan aromática.

Al Concluir la Carbonatación con CO2 embotellamos con una BeerGun, según nuestro vídeo de nuestro canal Youtube o bien servimos la cerveza desde el Corni con la ayuda de un grifo.
Si embotellamos desde corni con la cerveza carbonatada, conviene dejar las cervezas en nevera entre 5 y 8 grados durante una semana para que se asienten....y después empezar a tomar. Siempre guardar las botellas en frío habitual de nevera para preservar el punch de lúpulo.

Salud y suerte!

Author:

Gaukar

Boil Size: 28.5 Litres

Boil Time: 70

Boil Gravity: N/A

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/2/2013 9:26 PM

Notes: Starter:

Gjæring:
helst så lav som mulig, trives best på 15-17 og så varmere etter hovedgjæring.

Lagres kaldt i 30 dager.

Ferment the beer at 60°F (15°C) or as close as you can get to 60°F (15°C). Once the fermentation is complete, find a cold place to store the beer for a few weeks. A lagering period will help the beer if you can do it, but don’t sweat it if you can’t.

Author:

JonyMac

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.062

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/25/2014 8:17 PM

Notes: - Do iodine test pre-boil to ensure conversion was successful

- Days 1-7 Primary
- Days 8-14 Secondary
- Days 15-21 add dry hops to secondary
- Day 22 Add 1 TSP of plain gelatin to secondary and cold crash 48 hours
- Day 24 Rack to bright keg or bottle

Author:

Boil Size: 7.4 Gallons

Boil Time: 60

Boil Gravity: 1.03

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 90 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/19/2019 1:04 AM

Notes:

Author:

Boil Size: 7.08 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 75

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: co2

Priming Amount: N/A

Creation Date: 5/7/2019 4:48 AM

Notes: