Strawberry Raspberry Rose Seltzer Beer Recipe | Extract No Profile Selected | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Strawberry Raspberry Rose Seltzer

149 calories 7.1 g 12 oz
Beer Stats
Method: Extract
Style: No Profile Selected
Boil Time: 3 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 5 gallons
Post Boil Size: 5 gallons
Pre Boil Gravity: 1.047 (recipe based estimate)
Post Boil Gravity: 1.047 (recipe based estimate)
Efficiency: 100% (steeping grains only)
Calories: 149 calories (Per 12oz)
Carbs: 7.1 g (Per 12oz)
Created: Thursday March 24th 2022
1.047
1.000
6.1%
0.0
0.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 lb Cane Sugar5 lb Cane Sugar 46 0 75.5%
16 oz Strawberry16 oz Strawberry 3.15 0 15.1%
10 oz Raspberry10 oz Raspberry 3.15 0 9.4%
106 oz / 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
0.50 tsp rose water extract Water Agt Mash --
1 oz whitelabs seltzermax Water Agt Mash --
 
Yeast
Omega Yeast Labs - Lutra Kveik OYL-071
Amount:
1 Each
Cost:
Attenuation (avg):
78%
Flocculation:
Medium
Optimum Temp:
68 - 95 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 77 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 0 Volumes
 
Target Water Profile
RB Distilled / RO / Purified
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
 
Notes

===================================
4/24/2022
I kegged this Tuesday 419 from hot with no gelatin. Next day it was pouring with floaters so Wednesday 420 i transferred out of keg and made a make shift filter although not much seemed to get caught I wonder if the floaters were just a few in the first pour. Anyway rekegged it it was 1005 and shook the keg to carb and went on to can. Not sure the carb level but it was on the light side. Also added the rose water extract but have no good idea how much. I did one drop per 16 oz sample so in the end I added 35 drops to a measuring cup but it was immeasurable in the cup and the scale said 0g. So need to figure that out. The cans came out nice tho the rose water could be turned up slightly for experimentation purpose and carb level as well.

===================================
4/14/2022

brew day was a little strange as i brewed this straight up without the fruit then brewed another batch several days later, combining the two then separating them again into separate fermenters, one for plain and the other one for this version with the fruit which i added 7 days ago.

pretty slow fermentation on this and the other one, as of today this is at 1.012 (the other one is higher, about 1.020). i will say it i believe i measured it at 1.015 yesterday so maybe improving

tonight i opened up the fermenter and it does appear to have some active fermentation still going, not sure why this lutra is so slow....obviously it could be because of the fruit but the other fermenter without the fruit is also slow and even slower without the fruit so idk.

anyway i was getting worried about that fruit being at 80 degrees in there so i transferred and filtered the seltzer into a clean fermenter, left a lot of the trub and fruit remains behind, added a couple more spoonfuls of lutra yeast, and two tsp of yeast nutrient which i believe is DAP. oxygenated by pouring back and forth and stirring. ive read seltzer is less susceptible to damage due to oxidation.

on another note it tastes really good. you can tell there is residual sweetness there and its not complex at all, its straight up sugar sweetness. but light and mixed with the fruit flavor its nice. id almost like to stop it like this and package. but in the interest of understanding seltzer i want to try to give it the best chance to ferment all the way out properly then see how that tastes.

i also added a couple drops of rose water extract to 4oz sampler and it tasted really good, a little strong on the nose. im thinking we probably want to start with 1 drop per 16oz can and go from there. not sure how to measure that over the course of the entire batch/keg....

...that would be approx 35-40 drops into the keg not sure if i want to measure it that way or figure something else out. maybe measure 35-40 drops into a measuring cup and see how much that is so next time you can just go from that. andor should measure the 35-40 drops and weight that junk too so next time you can go by weight.


===================================
3/24/2022

initial recipe creation. sounds pretty straightforward, need to figure out how much rose water and extract to add. may want to add rose water at packaging time then do the flavorings at pour time for experimental purposes.

Recipe Picture
Last Updated and Sharing
 
508
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-04-26 15:15 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top