Maximus Grist II - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Maximus Grist II

176 calories 15 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Amber Ale
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Pre Boil Gravity: 1.043 (recipe based estimate)
Efficiency: 68% (brew house)
Source: Twelve Bells Brewing Société
Calories: 176 calories (Per 12oz)
Carbs: 15 g (Per 12oz)
Created: Wednesday May 20th 2015
1.054
1.009
5.9%
36.5
13.4
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
7 lb American - Pale Ale7 lb Pale Ale 37 3.5 58.3%
2.50 lb Belgian - Munich2.5 lb Munich 38 6 20.8%
2 lb American - Victory2 lb Victory 34 28 16.7%
0.50 lb American - Caramel / Crystal 80L0.5 lb Caramel / Crystal 80L 33 80 4.2%
12 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Simcoe0.5 oz Simcoe Hops Pellet 12.7 Boil 60 min 23.45 25%
0.50 oz Cascade0.5 oz Cascade Hops Leaf/Whole 7 Boil 20 min 7.12 25%
0.50 oz Cascade0.5 oz Cascade Hops Leaf/Whole 7 Boil 10 min 4.26 25%
0.50 oz Willamette0.5 oz Willamette Hops Pellet 4.5 Boil 5 min 1.66 25%
2 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
2 tsp gypsum Water Agt Boil 1 hr.
1 tbsp Irish Moss Fining Boil 10 min.
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (custom):
86%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: Corn Sugar       Amount: 4 ounces       CO2 Level: 2.2 Volumes
 
Target Water Profile
Artesian Water Main, Delaware ref: WCR/AWC2014
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
109 5 40 50 18 104
Mash and strike water Britta® filtered.

The Artesian Water system is supplied from over 50 wells located throughout northern New Castle County. These wells are in the Columbia, Potomac, Cockeysville Marble and Mount Laurel formations.
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
16 qt Infusion -- 156 °F 60 min
20 qt Sparge -- 153 °F 30 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 4.5 18  
Mash volume with grains 5.46 21.8  
Grain absorption losses -1.5 -6  
Remaining sparge water volume (equipment estimates 4.33 g | 17.3 qt) 4.25 17  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.08 g | 28.3 qt) 7 28  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil Volume 5.5 22  
Going into fermentor 5.5 22  
Total: 8.75 35
Equipment Profile Used: System Default
 
Notes

Brew Day Schedule:
Remove yeast from refrigerator 3-6 hours before pitching.
Mix crushed grains in Mash tun w/h 4 gallons water at 156°F. (Strike water 170°F). Mash for 60 minutes.
Re-circulate (vorlauf) until wort is fairly clear (appx. 20 minutes); begin to drain wort into brew kettle.
Fly sparge with 5 gallons of strike water at 170°F. End run of wort to brew kettle @ 6.5 gallons.
Boil wort in kettle. Add gypsum and continue to boil for 60 minutes.
Add bittering hops @ 60 min. before end of boil, 1st flavoring hops @ 20 min. before end of the boil.
Add 2nd flavoring hop and Irish moss at 10 minutes before end of the boil.
Add finishing (aroma) hops at 5 minutes before end of the boil.
• Cool wort to 73°F, record OG, transfer the wort to carboy and pitch yeast.

Last Updated and Sharing
 
957
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-10-09 15:13 UTC