Show us your boil

Preboil
20231210_110400.jpg
 
Donoroto said:
Just confirm for me that the only place where "excess pressure" can exit from that setup is the water drain hose, right?

I know it does not get pressurized, but all the other holes are plugged it seems.
Click to expand...
What actually happens is that once steam starts to condense in the water spray a bit of a vacuum is created.
The water spray is roughly where I drew the blue lines below.
So, the opposite of pressure...

1703946628979.png
 
Mine’s very low tech, but works great. I put the chiller & the hop strainer in at the beginning of the boil, hook up the water and drain hoses, and set the timer for hop additions. When done, I turn on the water and sit back with a beer or two.

20240106_143239-jpg.27948



20240106_143239-jpg.27947
 

Attachments

  • 20240106_143239.jpg
    20240106_143239.jpg
    560.2 KB · Views: 81
Beerbelly said:
Mine’s very low tech, but works great. I put the chiller & the hop strainer in at the beginning of the boil, hook up the water and drain hoses, and set the timer for hop additions. When done, I turn on the water and sit back with a beer or two.

20240106_143239-jpg.27948



20240106_143239-jpg.27947
Click to expand...
Wood fired brewing!
 
Just pre-boil, with no boil hops I only boiled for 30 minutes. I circulated through CF chiller for about 10 minutes just before getting to a boil, didn't want to start circulating with 10 to go, and lose the boil (110V system).
20240120_094903.jpg
 
You must log in or register to reply here.
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information

Back
Top