I brewed today!

The only yeast I've ever used in my oatmeal/chocolate stout has been WLP004 Irish Ale yeast. I have some Kveik in the fridge (dry packet) that I may try out on it next time. The WLP004 tends to quit a little early, IMO. Either that, or I'm not controlling temperature well enough in the mashing. I figure I'm getting too much unfermentable sugar in the wort somehow. and rarely get below 1.025 with the FG. I think the Oatmeal/Chocolate stout would be a bit better with a dryer finish. Thanks for the ideas, guys.
 
RoadRoach said:
The only yeast I've ever used in my oatmeal/chocolate stout has been WLP004 Irish Ale yeast. I have some Kveik in the fridge (dry packet) that I may try out on it next time. The WLP004 tends to quit a little early, IMO. Either that, or I'm not controlling temperature well enough in the mashing. I figure I'm getting too much unfermentable sugar in the wort somehow. and rarely get below 1.025 with the FG. I think the Oatmeal/Chocolate stout would be a bit better with a dryer finish. Thanks for the ideas, guys.
Click to expand...
I used VOSS Kveik in a Porter once.
I didn't like it, it had a zingy citrussy flavor.
It did fade over time and was enjoyable, but it took quite a while.
 
RoadRoach said:
The only yeast I've ever used in my oatmeal/chocolate stout has been WLP004 Irish Ale yeast. I have some Kveik in the fridge (dry packet) that I may try out on it next time. The WLP004 tends to quit a little early, IMO. Either that, or I'm not controlling temperature well enough in the mashing. I figure I'm getting too much unfermentable sugar in the wort somehow. and rarely get below 1.025 with the FG. I think the Oatmeal/Chocolate stout would be a bit better with a dryer finish. Thanks for the ideas, guys.
Click to expand...
I would give the kviek a swing. You could shoot for a lower fermentation temp to control esters, but overall it should be a decent beer! I personally really like Voss(i think i have mentioned that before on here lol)
 
Bigbre04 said:
I would give the kviek a swing. You could shoot for a lower fermentation temp to control esters, but overall it should be a decent beer! I personally really like Voss(i think i have mentioned that before on here lol)
Click to expand...
Fermentation Temperature is not a problem. I have a dedicated fridgadeezer and can monitor batch temps to control the fridge with a little Inkbird. My biggest temperature control issue is mashing, but hoping to resolve that soon. We did a little decluttering and had a yard sale last weekend. Gonna sneak some of that cash for a new RIMS tube. Already have a second Inkbird. Just a matter of building the controller and tuning the system then I can brew again.
 
Well, yesterday, but it's been busy.

Brown on the boil. Hope it doesn't run off the side...
0267574F-B930-4329-A4C1-CA8692A65A2F.jpeg
 
How was it? Tips for recipe? Looking to try brewing one for a HB comp.
 
Get your balance the way you want, but I did an Oatmeal Porter that came out great using WLP004, 2oz Fuggles in 5 gallons, about 9.6% Flaked Oats, Maris Otter Base 61.5%, about 13.5% Munich, about 7.7% Chocolate 350, about 3.8% C120, and about 3.8% White Wheat for even more head retention.
Very tasty, nice and light @4.8%, flavorful, and crushable at the same time.
You can play with the malt, but I would use an English base, English hops, and an Irish Ale yeast. That yeast is what makes that beer really tasty.
I mean you can probably ferment at 50 billion degrees for 3 seconds, but why enter it then?
 
Yesterday I brewed one of the kits I picked up from Morebeer. I put it straght into the fermenter on top of the leftovers from the previous batch.
I poured out any remaining beer then added a quart or so of fresh wort. Sloshed it around to get it liquefied and off the bottom. Poured in the rest of thr wort and let rip.
This morning it is going to town. Picked up about 5 degrees (f) and gravity is dropping WAY faster than the 1056 did in the first run. Overpitch?
 
Yes...
But thats nothing to worry about
 
west1m said:
Yesterday I brewed one of the kits I picked up from Morebeer. I put it straght into the fermenter on top of the leftovers from the previous batch.
I poured out any remaining beer then added a quart or so of fresh wort. Sloshed it around to get it liquefied and off the bottom. Poured in the rest of thr wort and let rip.
This morning it is going to town. Picked up about 5 degrees (f) and gravity is dropping WAY faster than the 1056 did in the first run. Overpitch?
Click to expand...
I’ve done similar with 3 batches of my summer sipper back to back. Third batch ripped through initial fermentation in two days and left a ton of yeast in the fermenter. The fermentation was so fast it still managed to puke out through the airlock with 8+ inches of headspace. The first batch was a fresh packet of S005. The second and third batches were better than the first, but the second was also better than the third. Seems to be a fine line for overpitch.
 
RoadRoach said:
Help me out a little with what I’m looking at. Do you recirculate through the CFC during your entire boil, or are you close to flame out and sanitizing the CFC?
Click to expand...
I connect everything up once hot break ends, but I don't turn on the pump until just before "flame" out, letting it circulate for 10 minutes or so with near-boiling wort. This image was taken after I'd turned on the pump briefly during the boil, then switched it off once the CFC was good n hot. I don't normally do that, but I did it this time.
 
My kegerator is actually a fermentation fridge this week while the pale ale ferments. I decided to monopolize on the space and threw together an extract Vienna Lager. Been a while since ive done an extract brew, but I don't hate a 2 hour brew day versus my normal 4 hours!
20240530_135940.jpg
20240530_154648.jpg
 
Sunfire96 said:
My kegerator is actually a fermentation fridge this week while the pale ale ferments. I decided to monopolize on the space and threw together an extract Vienna Lager. Been a while since ive done an extract brew, but I don't hate a 2 hour brew day versus my normal 4 hours!
View attachment 29534View attachment 29535
Click to expand...
Ditto on the short brew day. I have one that I do that’s 1-1/2 hours from when I get the gear out until I put it back up with the batch in the fermentation fridge. It’s my summer drnker too, so spares Me all heat.
 
You must log in or register to reply here.
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2025 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information

Back
Top