Super Stout (30th anniversary edition) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Super Stout (30th anniversary edition)

253 calories 26.8 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: American Stout
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 5 gallons
Pre Boil Gravity: 1.083 (recipe based estimate)
Efficiency: 70% (brew house)
Source: Jay Thomas
Calories: 253 calories (Per 12oz)
Carbs: 26.8 g (Per 12oz)
Created: Thursday October 12th 2017
1.076
1.020
7.3%
57.2
43.9
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 lb Liquid Malt Extract - Dark5 lb Liquid Malt Extract - Dark 35 30 43.5%
4.50 lb Dry Malt Extract - Dark4.5 lb Dry Malt Extract - Dark 44 30 39.1%
1 lb American - Caramel / Crystal 75L1 lb Caramel / Crystal 75L 33 75 8.7%
0.50 lb American - Roasted Barley0.5 lb Roasted Barley 33 300 4.3%
0.50 lb American - Black Malt0.5 lb Black Malt 28 500 4.3%
11.50 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Cluster2 oz Cluster Hops Pellet 8.2 Boil 60 min 41.94 50%
1 oz Tettnanger1 oz Tettnanger Hops Pellet 4.5 Boil 60 min 11.51 25%
1 oz Tettnanger1 oz Tettnanger Hops Leaf/Whole 4.5 Boil 10 min 3.79 25%
4 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
0.50 each whirlflock Fining Boil 10 min.
0.50 tsp Wyeast - beer nutrient Other Boil 10 min.
 
Yeast
Wyeast - Irish Ale 1084
Amount:
1 Each
Cost:
Attenuation (avg):
73%
Flocculation:
Medium
Optimum Temp:
62 - 72 °F
Starter:
Yes
Fermentation Temp:
70 °F
Pitch Rate:
0.5 (M cells / ml / ° P) 192 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: Bottle condition       Amount: 1 cop corn sugar       CO2 Level: 2.8 Volumes
 
Target Water Profile
Eldorado Springs
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
11 3 6 0 20 107
Add 2 tsp gypsum and .5 tsp baking soda
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
2 gal Heat grains to boil and shut off. Temperature -- 212 °F --
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.63 g | 26.5 qt) 4.48 17.9  
Mash volume with grains (equipment estimates 6.63 g | 26.5 qt) 4.64 18.6  
Grain absorption losses (steeping) -0.25 -1  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.77 3.1  
Pre boil volume (equipment estimates 7.15 g | 28.6 qt) 5 20  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil volume 5.5 22  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 4.48 17.9
Equipment Profile Used: System Default
 
Notes

Have the grains in a brew bag along with 2 gallons treated water. Bring to a near boil and shut off the heat. Let the grains steep for about 30 minutes. Drain to brew kettle. Rinse off the grains with 2 gallons of 180 degree water. Fill brew kettle to 4 gallon line and bring to a boil. Add extract. When it starts to boil again add the bittering hops. Boil for 50 minutes and add the finish hops, nutrient and whirlflock. Boil 10 more minutes. Cool to fermenter. Sparge hops with cold water to near the 5 gallon mark and pitch the yeast.

Last Updated and Sharing
 
583
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2017-10-22 17:23 UTC