Vavilovian Mimicry - Rye IPA (Extract) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Vavilovian Mimicry - Rye IPA (Extract)

193 calories 21 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American IPA
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2 gallons
Pre Boil Gravity: 1.144 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Source: Frosty Weasel Brewing
Calories: 193 calories (Per 12oz)
Carbs: 21 g (Per 12oz)
Created: Monday May 25th 2015
1.058
1.016
5.5%
68.3
14.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Extra Light6 lb Dry Malt Extract - Extra Light 42 2.5 66.7%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
0.50 lb American - Caramel / Crystal 60L0.5 lb Caramel / Crystal 60L 34 60 5.6%
0.50 lb American - Carapils (Dextrine Malt)0.5 lb Carapils (Dextrine Malt) 33 1.8 5.6%
1 lb United Kingdom - Crystal Rye1 lb Crystal Rye 33 90 11.1%
1 lb American - Rye1 lb Rye 38 3.5 11.1%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Magnum2 oz Magnum Hops Pellet 15 Boil 60 min 48.86 33.3%
1 oz Challenger1 oz Challenger Hops Pellet 8.5 Boil 30 min 10.64 16.7%
1 oz Cascade1 oz Cascade Hops Pellet 7 Boil 30 min 8.76 16.7%
1 oz Cascade1 oz Cascade Hops Pellet 7 Dry Hop 8 days 16.7%
1 oz Challenger1 oz Challenger Hops Pellet 8.5 Dry Hop 8 days 16.7%
6 oz / $ 0.00
 
Yeast
Wyeast - London Ale III 1318
Amount:
1 Each
Cost:
Attenuation (avg):
73%
Flocculation:
High
Optimum Temp:
64 - 74 °F
Starter:
No
Fermentation Temp:
74 °F
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
80 5 25 75 80 100
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.56 g | 26.2 qt) 1.91 7.6  
Mash volume with grains (equipment estimates 6.56 g | 26.2 qt) 2.15 8.6  
Grain absorption losses (steeping) -0.38 -1.5  
Volume increase from sugar/extract (early additions) 0.47 1.9  
Pre boil volume (equipment estimates 6.65 g | 26.6 qt) 2 8  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 1.91 7.6
Equipment Profile Used: System Default
 
Notes

Steep grains in 1.5 gallons of water at 155ºF for 30 minutes. Rinse grains and remove.

Add .5 gallons of water plus the dry malt extract and bring to a boil.

While boiling, add the hops per the hopping schedule.

Add Irish moss after 45 minutes of boiling.

Cool the wort to 75ºF and add to 3 gallons of cold water to primary fermenter and top off with cold water to make five gallons.

Pitch yeast and aerate well. Ferment in primary for 5 days.

Rack to secondar and add dry hops per schedule. Ferment for an additional 8 days.

Rack to bottling bucket and priming mixture. Bottle and condition in bottle for at least two weeks.

Last Updated and Sharing
 
1,623
Views
2
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-12-11 17:01 UTC