Grain Bill oats- just use old fashioned Quaker oats

Mash Temp- Its better to mash on the higher side and try to get a "sweeter" or less ferment-able beer usually 154-158.
Mash pH of 5.0-5.4. Correct acidity with lactic acid 88%. Measure after mash in.

Water profile- Maintain a 1:1 chloride to sulfate ratio at a level of 150 ppm. These are the only two water variables that should be monitored.

Dry hop in 2 steps. 1.) add 30% of dry hops at day 2-3 of active fermentation or after high krasen. 2.) add second dry hop once fermentation has completed let sit for 3-5 days before transferring. Another option is to transfer once fermentation has completed and just dry hop in the keg with a 5 g paint strainer bag.

Packaging- After 1st dry hopping do not let beer interact with oxygen. This will result in oxidation and a ruined product. Perform a closed transfer to a keg that is scrubbed of oxygen/air. You can do this by filling a keg with starsan and push it out with CO2. This will leave you with a keg full of CO2. Once complete pop the keg open and add dry hops in a bag. CO2 should stay in the keg during this addition as it is heavier than air. Hook up racking cane to out post of keg . Then hook up CO2 to fermentor and push beer into keg. DO NOT BOTTLE once dry hopped.