- Joined
- Sep 9, 2020
- Messages
- 94
- Reaction score
- 35
- Points
- 18
Hey guys,
I bought a taprite dual pressure regulator and my kegerator and can’t fit my 10 lb tank on the inside with 2 kegs in there.
I was wondering the best way about getting a hose to have my regulator on the inside and tank on the outside.
My kegerator only has one hole out the back and I really don’t want to drill one into it.
I read that CO2 tanks take a CGA 320 connector, but I can’t seem to find a braided steel hose with those m/F connectors.
I also see my regulator input looks to be 3/8” but the back says left handed and looks to be brass, don’t want to damage it.
-Will
I bought a taprite dual pressure regulator and my kegerator and can’t fit my 10 lb tank on the inside with 2 kegs in there.
I was wondering the best way about getting a hose to have my regulator on the inside and tank on the outside.
My kegerator only has one hole out the back and I really don’t want to drill one into it.
I read that CO2 tanks take a CGA 320 connector, but I can’t seem to find a braided steel hose with those m/F connectors.
I also see my regulator input looks to be 3/8” but the back says left handed and looks to be brass, don’t want to damage it.
-Will