Well getting more excited now about my Keezer build more parts came today yay!
. 2.6kg co2 filled cylinder I went for the smaller one so can sit it in my freezer and makes for filling easier (had my 6kg freeze up at the HB store once so couldn't fill it).
.4 way gas manifold 5 if I wack a barb on the end of it.
. 30 Meters of 4mm ID 8mm OD gas line! Plenty now plus the smaller internal diameter will mean I won't need to use so much for equalization or something. But pain in arse to fit on barbs.
. Some clear vinyl tubing for gas lines more flexy.
Some grey disconnects with MFL threads so can use them push fittings on the liquid posts were sold out dam it!
Got a one way valve gunna put this before regulator. Apparently them manifolds have an in built one way valve??
And two intertaps as a replacement for the pro's cheap arse taps he had on in appreciation for his loan of his keggerator over these years.
Oh and finally some CaCL2
Questions
. What fans do youse use in your keezer links please
.
. What's your temp probe placement ideah (in a bottle of water)?
Also got me timber to build my keezer frame here is me sketch on what I've got in my head atm. Gunna do mini orb cladding framed by hardwood decking edging like my sink I built but from freezer lid up will be some sorta ply /hardwood sheeting. I want to somehow store all my HB crap in these shelves/draws. I was thinking of using them plastic storage boxes as draws. My ideah being I can pull the whole draw out on brew day to use what I need and being plastic if they get too much mouldy wort on them I can just rinse them out let em dry and put them back.
Up top I'll just have shelves. Across the middle as a header I was thinking a bit of cross cut log style timber with Ben's Bar carved / burnt into it.
Here's me frame crude drawing but you get the gist. The whole things on castors so can wheel it out for cleaning and such.
let us know your thoughts. Maybe I should start a keezer build thread?