Odell Pilsner Project: Lórien & HBC 1134

https://beerandbrewing.com/recipe-odell-pilsner-project-lorien-and-hbc-1134/?utm_source=drip&utm_medium=email&utm_campaign=CBB 08.02.22 EDIT&utm_content=Recipe: Odell Pilsner Project: Lórien & HBC 1134


DIRECTIONS
Mill the grains. Mash in at 110°F (43°C), rest 10 minutes; raise to 122°F (50°C), rest 15 minutes; raise to 140°F (60°C), rest 15 minutes; raise to 150°F (66°C), rest 20 minutes; then raise to 168°F (76°C) and mash out. (Alternatively, you can do a single-infusion mash at 150°F/66°C for 45 minutes.) Recirculate until the runnings are clear, then run off into the kettle. Sparge and top up as necessary to get about 6.5 gallons (25 liters) of wort, depending on your evaporation rate. Boil for 90 minutes, adding hops according to the schedule. After the boil, do a whirlpool step: Stir for 5 minutes to create a vortex, then add hops and steep 15 minutes. Chill to 55°F (13°C), aerate well, and pitch plenty of healthy yeast. Ferment at 57°F (14°C) for 1 day, then drop to 55°F (13°C). When fermentation is complete and the gravity has been stable for at least 3 days, crash to 32°F (0°C) and lager for 4 weeks, then rack, package, and carbonate.

BREWER’S NOTES
Mash pH: We adjust using a homegrown lactic culture, but you can use food-grade lactic acid and/or brewing salts to keep runoff below 5.6, targeting 5.1–5.2 in the kettle.
Water profile: Our chloride-to-sulfate ratio for this beer is 3:1.

HBC 1134: This is an experimental hop, not yet available on the market. However, its typical alpha acids and floral-spicy-lemon character are not unlike Aramis—or substitute another new hop you want to try.