Brewer's Friend

Print

#0018 AHS Anniversary IPA

188 calories 19.3 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: American IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Pre Boil Gravity: 1.048 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 188 calories (Per 12oz)
Carbs: 19.3 g (Per 12oz)
Created: Thursday February 25th 2016
1.057
1.014
5.6%
65.2
9.4
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
7 lb Liquid Malt Extract - Extra Light7 lb Liquid Malt Extract - Extra Light 37 2.5 77.8%
1 lb Dry Malt Extract - Extra Light1 lb Dry Malt Extract - Extra Light 42 2.5 11.1%
8 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb United Kingdom - Crystal 60L1 lb Crystal 60L 34 60 11.1%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Sorachi Ace1 oz Sorachi Ace Hops Pellet 11.1 Boil 60 min 39 33.3%
1 oz Columbus1 oz Columbus Hops Pellet 15 Boil 15 min 26.15 33.3%
1 oz Cascade1 oz Cascade Hops Pellet 7 Dry Hop 7 days 33.3%
3 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 each Whirlflloc Fining Boil 5 min.
1 each AHS Yeast Fuel Other Boil 10 min.
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.54 g | 26.2 qt) 5.97 23.9  
Mash volume with grains (equipment estimates 6.54 g | 26.2 qt) 6.05 24.2  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.66 2.6  
Pre boil volume (equipment estimates 7.08 g | 28.3 qt) 6.5 26  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 5.5 22  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 5.97 23.9
Equipment Profile Used: System Default
 
Notes

2/19/2016 ???
Used RO water. OG = 1.048? This seems low for an extract, not sure what happened, possible mis-reading?

2/26/2016
Transffered to keg at 20psi and dry hopped. FG = 1.012

3/2/2016
First glass. Not bad, mild hops and bitterness makes for a pretty easy drinking IPA. We'll see how it changes over the next few weeks.

Last Updated and Sharing
 
819
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-03-02 21:09 UTC