E0D Lagunitas Little Sumpin Sumpin ▲ 03.25.16 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

E0D Lagunitas Little Sumpin Sumpin ▲ 03.25.16

229 calories 23.4 g 12 oz
brewer logo
Beer Stats
Method: BIAB
Style: American IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Pre Boil Gravity: 1.054 (recipe based estimate)
Efficiency: 71% (brew house)
Source: Dan Collier - Steve Moore
Calories: 229 calories (Per 12oz)
Carbs: 23.4 g (Per 12oz)
Created: Thursday July 23rd 2015
1.069
1.017
6.9%
52.7
6.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
7 lb American - Pale 2-Row7 lb Pale 2-Row 37 1.8 46.9%
6.75 lb American - White Wheat6.75 lb White Wheat 40 2.8 45.2%
1 lb Rice Hulls1 lb Rice Hulls 0 0 6.7%
3 oz American - CaraCrystal Wheat Malt3 oz CaraCrystal Wheat Malt 34 55 1.3%
14.94 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.80 oz Nugget0.8 oz Nugget Hops Pellet 14 Boil 60 min 37.23 34.8%
0.25 oz Willamette0.25 oz Willamette Hops Pellet 4.5 Boil 30 min 2.87 10.9%
0.25 oz Willamette0.25 oz Willamette Hops Pellet 4.5 Boil 15 min 1.86 10.9%
1 oz Santiam1 oz Santiam Hops Pellet 6.5 Boil 15 min 10.72 43.5%
2.30 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tbsp 5.2 pH Balancer Water Agt Mash 1 hr.
1 each Whirlfock Water Agt Boil 15 min.
5 tsp Yeast Nutrient Water Agt Boil 10 min.
 
Yeast
White Labs - Dry English Ale Yeast WLP007
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-High
Optimum Temp:
65 - 70 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
2.0 (M cells / ml / ° P) 701 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Golden State Water 2013 Report
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
70 21 72 81 148 220
Placentia Water System – Source Water Quality
http://www.gswater.com/placentiaCCR/#ccr-laboratory
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
7 gal One gallon loss per 1/2 hour Infusion -- 153 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
Strike water volume (equipment estimates 9.2 g | 36.8 qt) 9.12 36.5  
Mash volume with grains (equipment estimates 10.4 g | 41.6 qt) 10.31 41.2  
Grain absorption losses -1.87 -7.5  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.09 g | 28.3 qt) 7 28  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.09 -0.3  
Post boil Volume 5.5 22  
Volume into fermentor 5.5 22  
Total: 9.12 36.5
Equipment Profile Used: System Default
 
Notes

♦ BREW DATES: Great Base Beer
Date: Brew Day • 03.25.16
Gravity End of Boil (OG) • 1.069
Gravity (FG) • 1.17
Date: Pitch Yeast Day • 03.27.16
Date: Keg Day • 04.08.16
Drafted Who’s House • Dan

♦ SESSION NOTES: (Now I would add the dry hops!)
Phantom didn't have 7.75 lbs Finland Wheat so I combined with American Wheat to a total of 6.75 lbs. Not dry hopping this beer on the first run.
Recipe from Zymurgy magazine. These are the one's I'm leaving out of this batch.
•0.75oz(21 g)Amarillo,8.5% a.a.(dry hop 5 days)
•0.75oz(21 g)Cascade,5.5% a.a.(dry hop 5 days)
•0.75oz(21 g)Centennial,10% a.a.(dry hop 5 days)
•0.75oz(21 g)Chinook, 13% a.a.(dry hop 5 days)
•0.75oz(21 g)CTZ, 14% a.a.(dry hop 5 days)

♦ STANDARD BREWING NOTES:
♫Create 8 gallons sparge water. Bring to 154° strike temperature. Prime pump. Pump water through hose. Add tablespoon 5.2 pH balancer
♫Add 2 drops Fermcap before adding grain.
♫Add grain – Sparge at 154° for 90 minutes (Minimum 60) (One gallon loss during sparge process) Water burn rate: 1-1/2 gallon per hour.
♫Boil clean water for end of boil session adjustment. Adjust to 5.5 water line.
•Dark beers – Add x tablespoon Calcium Carbonate
•IPA beers – Add 5 tablespoon Gypsum for IPA

WAKE UP!!!!!!
15 minutes – Add immersion chiller
15 minutes - Add Whirlfloc
10 minutes – Add 1 teaspoon Yeast Nutrient last

♦ Check to see if fermentation tank nozzle is pointed upwards

♦ KEGGING NOTES:
Purge oxygen with CO2
Chill keg 24 hours before force carbonation.
Force Carbonation Calculator: 20 psi 4 days
Volumes of CO2 2.5 at 36°F = 10.2 psi American Ales

♦ The Decoction Method
All decoction mashes start with a single infusion step where hot water is added to the mash to start the mashing process. Typical temperatures for the first step vary. Multiple step decoctions are often used. Some examples of steps include:

♥ DRINKABILITY: Great base to work from. Very light in color. Has a little citrus in character.
Last Updated and Sharing
 
1,683
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-04-14 16:34 UTC