Show your DIY Projects
- Thread starter DanC
- Start date
Well, depending on how it’s mounted, it’s either a gate for solitary giraffes, or a thundering herd of sheep.
My DIY for the day was changing oil in my small engine equipment and doing inspections on the older stuff.
Pulled the mowing deck out from under the riding mower and inspected it for cracks. Already welded it up a couple times to keep it going. Oil and filter and air filter on that(it’s a pretty big mower with a 22HP motor).
Disassembled a chipper/shredder I bought in 2005. Sharpened the blade and chipping knives, and checked the flails for cracks. Changed oil in that too.
The shredder took a bit longer than anticipated, so had to postpone the brush mower (Swisher rough cut mower), tiller,(50 year old Troybilt Horse) and a pressure washer. Made several messes in the process. Think I spent as much time sweeping as I did working on the equipment because of all the crap that fell outta the machines.
Pulled the mowing deck out from under the riding mower and inspected it for cracks. Already welded it up a couple times to keep it going. Oil and filter and air filter on that(it’s a pretty big mower with a 22HP motor).
Disassembled a chipper/shredder I bought in 2005. Sharpened the blade and chipping knives, and checked the flails for cracks. Changed oil in that too.
The shredder took a bit longer than anticipated, so had to postpone the brush mower (Swisher rough cut mower), tiller,(50 year old Troybilt Horse) and a pressure washer. Made several messes in the process. Think I spent as much time sweeping as I did working on the equipment because of all the crap that fell outta the machines.
What kind of oil do you use, and where do you get it?
I get straight 30 at wallymart for $14 a gallon. It's diesel oil, but that has more to do with its soot-handling capacity than its lubricity.
- Joined
- Apr 14, 2019
- Messages
- 323
- Reaction score
- 859
- Points
- 93
- Joined
- Mar 31, 2021
- Messages
- 3,247
- Reaction score
- 5,125
- Points
- 113
Where did you get the neoprene?
- Joined
- Apr 14, 2019
- Messages
- 323
- Reaction score
- 859
- Points
- 93
Amazon
Pump splash guard just a picture of pvc pipe with a gap on the bottom to fit over the pump
Castrol GTX 10W-30. I like how clean that stuff keeps the inside of an engine. Used to run the 20W-50 in a VW Baja that I owned for the better part of 30 years. I was pretty abusive with my online namesake, but never had a failure that was oil related.
- Joined
- Jul 27, 2017
- Messages
- 4,682
- Reaction score
- 4,528
- Points
- 113
That looks really good. I'm about 70% ready to begin assembling a trailer for the farm I'm going to build for my mom.
- Joined
- Jan 27, 2019
- Messages
- 3,874
- Reaction score
- 9,586
- Points
- 113
Been soldering.
I definitely need more practice. I think it must be 40 years plus since I last used a soldering iron.
But: I managed to fix the wiring on 2 torch light solar panels.
Quite proud of myself, so I can have a beer after finishing my tea
I definitely need more practice. I think it must be 40 years plus since I last used a soldering iron.
But: I managed to fix the wiring on 2 torch light solar panels.
Quite proud of myself, so I can have a beer after finishing my tea
I assume you are building a trailer, not a farm. I have a tiny 'farm' trailer, handier than a wheelbarrow for sure.
A neighbor gave me an old boat trailer designed for a 10' aluminum boat shortly after I moved in. Gotta love having good neighbors. I chopped about 3 feet off the tongue and built a wood body with PT lumber and decking, winding up with a 5 x 7. Already had a little dump box that I could pull behind the riding mower, but this thing knocked a lotta trips off hauling off leaves during fall cleanups. I've never even wired lights on it because I've never needed one that small on the road. I left the winch on it for a long time, and could easily tip it up, then winch the riding mower up into the body. I could still lift the tongue with one hand with the rider in the box. Pretty sure that would have some serious speed wobbles at highway speed.
Having grown up on a farm(and still only living about 1.5 miles away), I can say with absolute certainty, there's always something to do with the farm...
Glycol system is up and running. 1/2 HP Penguin Chiller, "cold box" insulated with reflectix, 2 inkbird controllers and Seaflo 21 series pumps. Runs very
quiet and has been maintining different temps in the fermenters for 12 hours with very little run time.
Next weekend I'll try it with wort instead of water
quiet and has been maintining different temps in the fermenters for 12 hours with very little run time.
Very nice. I'm just a bit jealous!Glycol system is up and running. 1/2 HP Penguin Chiller, "cold box" insulated with reflectix, 2 inkbird controllers and Seaflo 21 series pumps. Runs very
quiet and has been maintining different temps in the fermenters for 12 hours with very little run time. View attachment 29302Next weekend I'll try it with wort instead of water
View attachment 29301
View attachment 29303
