Quick water v mash guidline

[Biggins Brewer]

I can't get my quick water guideline to match the water in the mash profile. Any suggestions.

 

[Pricelessbrewing]

I can't get my quick water guideline to match the water in the mash profile. Any suggestions.

Thanks for reaching out, we do have a relatively large update coming to bring this two features together more closely.

I opened your recipe, made a copy, and aligned the two by using the "add quick water requirements" function in the mash guidelines section.

Please review, especially the temperatures, using the standalone mash calculator if needed.

 

[Biggins Brewer]

Much appreciated.

 

[Biggins Brewer]

Sorry, I still don't follow . On my landlord clone it has total water in my recipie of 180l but quick water says 164l

 

[Pricelessbrewing]

@Biggins Brewer

Let me know if this isn't clear in anyway.

Step 1:
Add Quick water requirements to the mash guidelines

Step 2:
Review your mash steps.

Step 3:
Add any missing steps (you want an infusion for mashout in this case).
I "borrowed" the 15L amount from the sparge in this case, so that the total amount of water stays the same, and I added some ballpark numbers OTOH for start temps, but again please check these with the standalone mash calculator.