- Joined
- Aug 16, 2019
- Messages
- 39
- Reaction score
- 39
- Points
- 18
curious how many here are using one and what their opinion is about it.
https://plaato.io/
https://plaato.io/
I don't have one but I have a beer machine that works on basically the same thing. It monitors fermentation and adjusts temps (hot or cold) estimates and notifies when fermentation is complete.curious how many here are using one and what their opinion is about it.
https://plaato.io/
do you have a link to the "beer machine"?I don't have one but I have a beer machine that works on basically the same thing. It monitors fermentation and adjusts temps (hot or cold) estimates and notifies when fermentation is complete.
I like the Plaato keg sensors myself!
The Plaato sensor is an airlock style design whereas the tilt unit goes directly into your fermentation vessel. Plaato also offers a keg sensor that helps keep track of volume of beer left in the keg, temperature, optional co2 monitoring etc, the airlock unit is a completely seperate device. it sounds to me, from the feedback I have so far, that the tilt may offer a bit more accuracy over the Plaato depending on what style of vessel you use and the type of beer you brew. I like the idea of not having to take samples to dertermine if FG has been reached and fermentation is complete. I am very new to all of this so if you are trying to make a decision please research further. best of luck!So, I had never heard of Plaato sensors. It would seem to be similar to a Tilt, something I also don't have. Having read about the Tilt, it seems interesting as does the Plaato.
I read above that you use it on the keg. I thought the Tilt was used in the fermenter. How do you use it?