- Joined
- Jun 7, 2018
- Messages
- 10
- Reaction score
- 3
- Points
- 3
Hello!
I've recently done a brew session where I got an efficiency value of 320% (!!!). Obviously this was incorrect. After confirming that I've measured/entered everything correctly, I have done some playing around with the log entry and found:
Apologies again for finding these bugs. I work in dev/devops by day, so I guess this is in my nature
thanks
Ben
I've recently done a brew session where I got an efficiency value of 320% (!!!). Obviously this was incorrect. After confirming that I've measured/entered everything correctly, I have done some playing around with the log entry and found:
- The pre-boil sample log entry box shows litres as the default volume unit (correctly, per my default preferences)
- I enter a number in the volume box (as well as SG) and press save.
- The efficiency calcluation for pre-boil shows as 320%. The log entry shows the volume in litres.
- I open the log entry again, select gallons, then (without saving) select litres, then save.
- The efficiency calculation now shows the correct 85% efficiency. The log entry shows the volume in litres.
- This all happened in brew session https://www.brewersfriend.com/homebrew/brewsession/328654
- Opening the log entry and changing the unit between litres/gallons now does seem to update the efficiency/PPG as expected (320% for gallons, 85% for litres). It *seems* to be only the first save where this is unreliable, though it doesn't happen every time, so could be a race condition ?
Apologies again for finding these bugs. I work in dev/devops by day, so I guess this is in my nature
thanks
Ben