I had this happen a few years back when I cold crashed. At that time I had a glass carboy and could see a half inch layer of the star sans floating on top of the beer. Why it did not disperse and mix in is not fully understood. I kegged it leaving that half inch layer behind. The beer won...

Yakima Valley says 1ml of hop extract in a 5 gallon batch of 1.050 wort for 60 minutes will produce 10 IBU’s. When I input that into Brewers friend Recipe builder I get nowhere near that.

Yes the fix should be only to the ABV, since the OG remains the same. they should just take the OG add the sugar points and calculate the ABV from that. Using my tilt I can see about a 6-7 point increase on a 6 gallon batch. see attached graph. note OG did not change but 6-7 points were...

Yes when will the ticket be worked on to correct the known error for adding sugar to the fermentor.? With my Tilt I can see the SG jump up about 6 points once the sugar is added to the fermentor. The BF calculation needs to take those 6 points and add it to the ABV calculation which it does...

I had a bunch of "NaN" readings for gravities the first day. I could not save the edits of them, so I just deleted the dozen or so points and the graph appeared. interesting. I wonder if when I was calibrating to a known point I did something wrong. anyway problem solved.

Thanks. The graph was there for the first hour or two, but then disappeared. If that helps. Data still being logged.

I have two batches fermenting all tilt data being captured by Brewers Friend. Oneof the batches is not showing the graph. It is showing all the data when I click edit data. It is showing the 4 real time “speedometers”. Just not showing the graph. The other batch on a different color tilt is...

Didn’t try that. Got it working by hooking modem directly to old router, then new router to old router. Only thing connected wirelessly to old router is the rPi3. After reflashing again it’s logging. For some reason the logging entry to brewers friend would not stay on the brewers friend URL...

2 tilts connected via bluetooth raspPi 3. Worked great for 6 months under old wifi, logging data to brewers friend. Installed new eero6 wifi system reflashed the disk and put all the network info onto the disk as well. my RaspberryPi 3 will not connect wirelessly to new Eero wifi network. I can...

I can link the Tilt hydrometer to brewers friend web based but not to brewers friend app? Anyone figure it out?