- Joined
- Mar 14, 2018
- Messages
- 9,034
- Reaction score
- 16,397
- Points
- 113
Has anyone ever used, or seen a Keggle converted to use as a fermenter? The used 3V system I bought came with an extra Keggle. As I am brewing 10g batches, it would be nice to ferment it all together instead of in separate carboys... The top is cut out of it to 11-5/8" diameter, and it has one sanitary port towards the bottom. I could probably figure out some kind of lid that I could get to seal up fairly decently. Not sure if that port will be at a good height for racking or not. I could just put a plug on that port and make a new hole for one of those ports with the tube that you can turn as the level drops...