Mill gap setting?

papajak

New Member
Premium Member
Joined
Nov 23, 2019
Messages
2
Reaction score
0
Points
1
Hello, I'm going to try crushing my own grains for the first time. What gap size should I set my mill too? I found an old article here that suggest .035", is that about right? I have a 2 roller mill if that makes a difference.
 
I set mine at .035 and have had good success with it.
 
Depends on your brewing style.
BIAB can be/should be finer than the others
 
I have mine about 0.045. Works well with my setup.
 

Back
Top