CTZ Extract Bitter 2 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

CTZ Extract Bitter 2

144 calories 14.3 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Best Bitter
Boil Time: 15 min
Batch Size: 1.75 gallons (fermentor volume)
Pre Boil Size: 2 gallons
Post Boil Size: 1.6 gallons
Pre Boil Gravity: 1.039 (recipe based estimate)
Post Boil Gravity: 1.048 (recipe based estimate)
Efficiency: 68% (steeping grains only)
Hop Utilization: 99%
Calories: 144 calories (Per 12oz)
Carbs: 14.3 g (Per 12oz)
Created: Monday February 21st 2022
1.044
1.010
4.5%
36.6
20.3
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG EBC Bill %
1.50 lb Briess - DME Pale Ale1.5 lb DME Pale Ale 45 14.51 77.4%
1.50 lbs / £ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
3 oz American - Caramel / Crystal 80L3 oz Caramel / Crystal 80L 33 80 9.7%
2 oz Weyermann - Carafoam2 oz Carafoam 34.5 2.2 6.5%
2 oz Briess - Special Roast2 oz Special Roast 33 40 6.5%
£ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.40 oz CTZ0.4 oz CTZ Hops Pellet 15.5 Boil 15 min 36.6 44.4%
0.50 oz CTZ0.5 oz CTZ Hops Pellet 15.5 Boil 0 min 55.6%
0.90 oz / £ 0.00
 
Yeast
Danstar - Nottingham Ale Yeast
Amount:
1 Each
Cost:
Attenuation (avg):
77%
Flocculation:
High
Optimum Temp:
57 - 70 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 25 B cells required
£ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 1.02 Volumes
 
Target Water Profile
Distilled
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
-- 153 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 1.95 g | 7.8 qt) 1.94 7.8  
Mash volume with grains (equipment estimates 1.95 g | 7.8 qt) 1.98 7.9  
Grain absorption losses (steeping) -0.05 -0.2  
Volume increase from sugar/extract (early additions) 0.11 0.4  
Pre boil volume 2 8  
Boil off losses -0.38 -1.5  
Hops absorption losses (first wort, boil, aroma) -0.03 -0.1  
Post boil volume 1.6 6.4  
Top off amount 0.15 0.6  
Going into fermentor 1.75 7  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.09 8.4
Equipment Profile Used: System Default
 
Notes

Fermented in the serving keg and spunded. This is right on for the style. Lots of hop character. The Nottingham combined with DME works really well for a low ABV brew.

Last Updated and Sharing
 
419
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-04-02 15:27 UTC