Irish Stout - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Irish Stout

157 calories 14.1 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: Irish Stout
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 5 gallons
Pre Boil Gravity: 1.031 (recipe based estimate)
Post Boil Gravity: 1.053 (recipe based estimate)
Efficiency: 65% (brew house)
Calories: 157 calories (Per 12oz)
Carbs: 14.1 g (Per 12oz)
Created: Tuesday October 5th 2021
1.048
1.009
5.1%
34.3
27.8
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3.30 lb Briess - LME Pale Ale3.3 lb LME Pale Ale 34.5 6 35.5%
1 lb Briess - DME Pale Ale1 lb DME Pale Ale - (late boil kettle addition) 45 6 10.8%
2 lb Flaked Barley2 lb Flaked Barley 32 2.2 21.5%
1 lb American - Roasted Barley1 lb Roasted Barley 33 300 10.8%
2 lb American - Pale 2-Row - Toasted2 lb Pale 2-Row - Toasted 33 30 21.5%
9.30 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz BSG - East Kent Goldings2 oz East Kent Goldings Hops Pellet 4.2 Boil 60 min 34.31 100%
2 oz / $ 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 87 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.84 g | 27.4 qt) 7.34 29.4  
Mash volume with grains (equipment estimates 6.84 g | 27.4 qt) 7.74 31  
Grain absorption losses (steeping) -0.63 -2.5  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.28 1.1  
Pre boil volume (equipment estimates 6.5 g | 26 qt) 7 28  
Volume increase from sugar/extract (late additions) 0.07 0.3  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 5 20  
Top off amount 0.5 2  
Going into fermentor 5.5 22  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 7.84 31.4
Equipment Profile Used: System Default
 
Notes

Brew date 10/2/2021
OG 1.046

Partial mash
Mash grain in 2 gallons water with 1/4 tsp pH5.2
Strike 165 F--> 30 min (temp down to 145 F) then
Strike 155 F --> 30 more min

Yeast starter with wert chilled to 66F

Slower bubble than safe ale 04 (red ale)

Last Updated and Sharing
 
302
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-10-05 01:36 UTC