Dupont-style Saison - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Dupont-style Saison

231 calories 26.5 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: Bière de Garde
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 3 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.115 (recipe based estimate)
Post Boil Gravity: 1.229 (recipe based estimate)
Efficiency: 70% (brew house)
Calories: 231 calories (Per 12oz)
Carbs: 26.5 g (Per 12oz)
Created: Sunday May 30th 2021
1.069
1.021
6.3%
13.0
9.8
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
8 lb Briess - LME Pilsen Light8 lb LME Pilsen Light 37.6 2 82.1%
0.50 lb Briess - Goldpils Vienna Malt0.5 lb Goldpils Vienna Malt 36.8 3.5 5.1%
0.25 lb Munich Malt0.25 lb Munich Malt 36.8 7.87 2.6%
0.50 lb Proximity - Caramunich 600.5 lb Caramunich 60 34.5 60 5.1%
0.50 lb American - CaraCrystal Wheat Malt0.5 lb CaraCrystal Wheat Malt 34 55 5.1%
9.75 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz East Kent Goldings1 oz East Kent Goldings Hops Pellet 5 Boil 60 min 10.63 50%
1 oz Styrian Goldings1 oz Styrian Goldings Hops Pellet 5.5 Boil 5 min 2.33 50%
2 oz / $ 0.00
 
Yeast
White Labs - Belgian Saison I Yeast WLP565
Amount:
1 Each
Cost:
Attenuation (avg):
70%
Flocculation:
Medium
Optimum Temp:
68 - 75 °F
Starter:
No
Fermentation Temp:
70 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 111 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: dme       Amount: 3.5       Temp: 68 °F       CO2 Level: 2.2 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 2.64 g | 10.5 qt) 2.56 10.2  
Mash volume with grains (equipment estimates 2.64 g | 10.5 qt) 2.7 10.8  
Grain absorption losses (steeping) -0.22 -0.9  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.66 2.6  
Pre boil volume (equipment estimates 3.08 g | 12.3 qt) 3 12  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 1.5 6  
Top off amount 3.5 14  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 6.06 24.2
Equipment Profile Used: System Default
 
Notes

PARTIAL MASH:
Mash the crushed grains at 150°F (66°C) for 60 minutes. Sparge with 168°F (76°C) water until you get 6 gallons (22.7 l), which will be boiled down to 5 gallons (19 l). Boil the wort for 60 minutes following the hops schedule. After chilling the wort to below 80°F (27°C), pitch the yeast.

Ferment at the recommended temperature for your yeast strain (refer to the yeast lab specs, roughly 65–70°F/18–21°C). Transfer the beer to a secondary fermentor after 10 days of primary fermentation. Continue fermenting at 65–70°F (18–21°C) until all signs of fermentation are gone, usually another 2 weeks. On bottling day, condition with ¾ cup of corn sugar (dextrose) or 1¼ cup of dry malt extract (DME). Rest bottles at 65–70°F (18–21°C) for 10 days until you achieve carbonation. Then enjoy.

Last Updated and Sharing
 
303
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-05-30 19:36 UTC