- Joined
- May 17, 2016
- Messages
- 6
- Reaction score
- 1
- Points
- 3
Hi,
I think there's an error in the Quick Water Requirements with the Strike Water (and therefore also with the Sparge Water) volumes. I have a recipe with a malt bill of 4.9 kg, a mash tun deadspace of 3.5 liter and a mash thickness of 3.5 l/kg. Logically this would mean that my strike water volume should be (3.5*4.9)+3.5=20.65 liter. However, in the Quick Water Requirements, the recommended volume is 19.6 liter.
Can anyone explain this to me and what I could be doing wrong?
Thanks,
Walter
I think there's an error in the Quick Water Requirements with the Strike Water (and therefore also with the Sparge Water) volumes. I have a recipe with a malt bill of 4.9 kg, a mash tun deadspace of 3.5 liter and a mash thickness of 3.5 l/kg. Logically this would mean that my strike water volume should be (3.5*4.9)+3.5=20.65 liter. However, in the Quick Water Requirements, the recommended volume is 19.6 liter.
Can anyone explain this to me and what I could be doing wrong?
Thanks,
Walter