SG graphics off kilter

Paul Welsh

New Member
Premium Member
Joined
Mar 7, 2018
Messages
7
Reaction score
2
Points
3
Location
Singapore
The fermentation semi-circular graphic is spilling off to the left. No biggie. This was true of the browser on my phone and laptop. Color extends past level. Starting gravity reading from Tilt Pi was 1.061 but this reading well below the horizon.

Thanks, I like the new interface. Quick, at a glance info.
 

Attachments

  • 6D01B671-EDF5-4D6D-9C11-DA1976210867.jpeg
    6D01B671-EDF5-4D6D-9C11-DA1976210867.jpeg
    189.6 KB · Views: 152
Last edited:
Photo is reuploaded - problem seems to have fixed itself when beer went below 1.050 or so.

Actually this was due to the range, which is set from your recipe,

The min is the recipe OG and the max is the recipe FG, so the reading from your Tilt must have been higher than the predicted OG on your recipe.
 
Actually this was due to the range, which is set from your recipe,

The min is the recipe OG and the max is the recipe FG, so the reading from your Tilt must have been higher than the predicted OG on your recipe.

I guess that's what happens when you double grind and your efficiency goes up by 10%. Good to know. My new Tilt is also not well calibrated so that could have put me "over the top" and around the bottom side. Just interested that the max could be exceeded beyond the "horizon".

Cheers
 

Back
Top