Pressure Fermenting

Buckzilla

Member
Premium Member
Established Member
Joined
Jun 7, 2022
Messages
36
Reaction score
35
Points
18
Used my new fermenters for the first time. One is a pressure fermenter and the other is a standard 8 gal conical. Made 2 batches of the same beer, same lot of ingredients and also the same lot of harvested Lutra yeast. The standard fermenter came out clear as usual. The batch in the pressure fermenter is hazy. Both batches finished identical at .998 FG. Taste identical. Maintained pressure at 9 through the duration of the fermentation.

For the newbie at pressure fermenting, is this normal? If yes, does it clear up? Assuming it may be entrapped CO2?
 
well .998 is unusual unless your making wine or cider
 
I've had that happen to me on a Mexican lager, looking back I wonder if I cold crashed it enough to allow everything to drop out of suspension.
9psi for a week should net you a beer that's carb'd and ready to rock when it goes into the kegs, but let it settle and get really cold first after transfer.
 
I've had that happen to me on a Mexican lager, looking back I wonder if I cold crashed it enough to allow everything to drop out of suspension.
9psi for a week should net you a beer that's carb'd and ready to rock when it goes into the kegs, but let it settle and get really cold first after transfer.
I don’t cold crash this recipe, fermenter to keg. Usually clear from the start and don’t need for it to drop out. Moved 32 oz into a growler and put in the frig. It dropped out and clear so from what I can see from pressure fermenting to basic does drop out equally.
 
.998 is the goal and my typical results. I make low carb beer heavy in enzymes.
just curious what was the OG
I only make lagers under pressure but only about 5 psi
they always clear
when doing a Kellerbier I raise the pressure and serve out of the fermenter and those stay a bit cloudy for a while which is to style
maybe your higher psi is stirring things up
 
just curious what was the OG
I only make lagers under pressure but only about 5 psi
they always clear
when doing a Kellerbier I raise the pressure and serve out of the fermenter and those stay a bit cloudy for a while which is to style
maybe your higher psi is stirring things up
1.030 og
Seems like the pressure fermenter kept a lot in suspension.
 
I started getting clear beers when I added cold crashing to the process. At first it was a kegerator, bucket and a keg full of ice water, and i'd set the temp to about 35F in the fridge. I got tired of refreshing the ice, so added in a glycol chiller. By this point, my equipment was taking up a bit more space than I wanted so I moved it to my garage. Texas heat laughed at my glycol chiller, at first I could only get about 44F in peak summer. I wrapped the fermenters, then got pressure capable units. 42F. I added external tubing for the glycol, 40f best case. Finally, I added a mini split AC system to the garage, now I can get to about 38F in the summer and for the 2 months of non-summer, I can get mid 30's.

I need about 39F on my tilt and inside thermowell to get stuff to drop out.
This journey got me from some clear beer, some cloudy beer, to almost everything being clear when finished.
 
the pressure fermentation may have slowed the fermentation a bit and in a few days it may have dropped out the same way.


I do a lot of pressure fermented lagers. Based on a paper that i read(from a large macro in asia) The optimum pressure for lager yeast is 10 psi and at D rest up the pressure to 15 psi and let the tank warm to whatever temp you d rest at.

i generally ferment my lagers at 57 under pressure and this yields a very consistent lager in 10 days.

if its a dark lager where there is a bunch of malt i sometimes just let it bubble into the bucket.

at 15 psi still need to hit the tank with CO2 for a while to finish the carb up. but i also carb fairly high (2.5 to 2.6) it holds carb better through filling and the draft system.

there was a thread about spunding a while ago where i went far more in depth. here it is i think.
https://www.brewersfriend.com/forum/threads/spunding-valves-and-diacetyl.17912/#post-213650
 

Back
Top