- Joined
- Nov 19, 2019
- Messages
- 1
- Reaction score
- 1
- Points
- 1
I've seen a few other manifolds in the homebrew wilds so I'm hoping this thread picks up some steam.
My goal, for awhile now, has been to eliminate hosing changes which eliminates mess. This manifold gives me the ability to underlet my MT, recirculate during mashing, chill, and whirlpool while bypassing the CFC. All without disconnecting a single hose.
In the attached photo we have three 3-way valves, connected together with a tee fitting mounted to my stainless brew table. There's various elbows and camlock fittings as well.
My goal, for awhile now, has been to eliminate hosing changes which eliminates mess. This manifold gives me the ability to underlet my MT, recirculate during mashing, chill, and whirlpool while bypassing the CFC. All without disconnecting a single hose.
In the attached photo we have three 3-way valves, connected together with a tee fitting mounted to my stainless brew table. There's various elbows and camlock fittings as well.