Flame out question

Discussion in 'Brew Sessions' started by casa, Apr 22, 2013.

  1. casa

    casa New Member

    Joined:
    Apr 22, 2013
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    I have 1.5 oz each of cascade, columbus and chinook left total 4.5 oz . i am going to bitter w/ warrior. 2 oz. Wanted to flame out with the listed hops. OG should be 1065-1070 . question is that overkill for the flame out ?addition.

    Thanks,
     
  2. LarryBrewer

    LarryBrewer Active Member

    Joined:
    Jun 27, 2012
    Messages:
    1,728
    Likes Received:
    9
    Trophy Points:
    38
    Location:
    Portland, Oregon
    Some people say too much hops give a grassy taste. Adding 4.5 oz at flame out is probably under that limit though, and if the recipe calls for it then don't worry about it.

    You could split them up, do half at flame out, half dry hop.
     
  3. bilhelm96

    bilhelm96 Member

    Joined:
    Aug 12, 2012
    Messages:
    91
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    NJ, USA
    I would put 1/2 ounce of each (1.5oz total) in at 10min, flameout and dry hop. Two ounces of warrior seems high for the OG.
     

Share This Page

arrow_white