Looking for some clarification or direction...
I'm building a recipe based on recommendations of percentages. My goal is 1.060 OG. I want the following:
I set the goal at 1.060, and set each percentage accordingly and are displayed as desired. However, the grain weight is different across the three 8% grains (in pounds, 0.81, 1.04, 1.02). I'm thinking that at 8% of the recipe, these weights should be the same, not different.
I save the recipe, exit the page, and return to the recipe. I find that the percentages have changed: 69.2%, 10.7%, 8.3%, 10.5%, 1.3%
What am I doing wrong?
Link:
https://www.brewersfriend.com/homebrew/recipe/view/951072/american-amber-ale
I'm building a recipe based on recommendations of percentages. My goal is 1.060 OG. I want the following:
75% base malt
8% another base malt
8% caramel malt
8% another caramel malt
1% roast malt
8% another base malt
8% caramel malt
8% another caramel malt
1% roast malt
I set the goal at 1.060, and set each percentage accordingly and are displayed as desired. However, the grain weight is different across the three 8% grains (in pounds, 0.81, 1.04, 1.02). I'm thinking that at 8% of the recipe, these weights should be the same, not different.
I save the recipe, exit the page, and return to the recipe. I find that the percentages have changed: 69.2%, 10.7%, 8.3%, 10.5%, 1.3%
What am I doing wrong?
Link:
https://www.brewersfriend.com/homebrew/recipe/view/951072/american-amber-ale