Equipment Profile help needed for Colorado Brewing System

Discussion in 'Recipe Editor' started by BrantleyB, Jun 6, 2018.

  1. BrantleyB

    BrantleyB New Member

    Joined:
    Jun 6, 2018
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Hi folks,
    Have just joined BF and am trying to set up my default equipment profile.

    My system is made by Colorado Brewing System. The official name of my equipment is:

    Nano Brewer Home Electric Brew System (20 gallon kettle)

    Does anyone else have this brewing system? If so, I'd appreciate any info I can use to set up my equipment profile (efficiency, etc.).

    Thanks in advance,
    Brant
     
  2. Ozarks Mountain Brew

    Staff Member

    Joined:
    Nov 20, 2012
    Messages:
    7,767
    Likes Received:
    3,977
    Trophy Points:
    113
    Gender:
    Male
    Occupation:
    IT Managment
    Location:
    The Ozark Mountains of Missouri
    Well firstly you will need to pick either kettle or fermenter so if you dump the whole pot into the fermenter you pick fermenter, picking the kettle you will have losses for leftover trub and hops in the boil kettle. as for all the other loses, you may have to do a water test for volume then absorbing and boil off rate relies on the humidity and wind some and boil strength it’s at least a 2 gallon boil off if not a bit more, you can roughly test that with water but it won’t be exact, I wish I could help more I've had one in the past but homemade so it’s not the same
     

Share This Page

arrow_white