Clear Beer Draught Sysytem

[Nola_Brew]

For those using this, when you replace the tubing what are you guys using?

I'm thinking EVA Barrier would be a good choice, just not sure which size. Thinking the 5MM maybe? Any other alternatives?

I have the 4mm tubing and it is definitely too small, just not sure the 5MM will be big enough, especially to fit over the keg dip tube.

 

[Craigerrr]

Do they offer suitable tubing, or recommend what tubing to use?

 

[Nola_Brew]

You can order from them but didn't want to go that route. Found some silicon tubing on eBay.

 

[Mark Farrall]

Not sure if it's a brand name but I've got some EVA Barrier line and I wouldn't use it for this, not very flexible. I use silicon tubing when I use the floating ball (though I suppose there's nothing stopping there being that laminated barrier approach in silicon tubing).

I've generally got the tubing with the ball when I've bought them. Looks like 5mm ID and it's fairly tight getting it over the keg dip tubes.

 

[Nola_Brew]

I have Eva barrier for my taps but it's too small.
I did find some silicon tubing on eBay I ordered.