Professor Zymie New Member Joined Mar 6, 2016 Messages 2 Reaction score 0 Points 1 Apr 18, 2018 #1 If i know the extraction coarse grind, as is from the malt analysis. How do i change the default number of a grain? Thanks.
If i know the extraction coarse grind, as is from the malt analysis. How do i change the default number of a grain? Thanks.
Ozarks Mountain Brewery Moderator Staff member Established Member Joined Nov 20, 2012 Messages 8,874 Reaction score 7,088 Points 113 Apr 18, 2018 #2 are you talking about in the recipe editor?
Ozarks Mountain Brewery Moderator Staff member Established Member Joined Nov 20, 2012 Messages 8,874 Reaction score 7,088 Points 113 Apr 18, 2018 #3 if so add custom button
KC Active Member Joined Feb 25, 2015 Messages 315 Reaction score 177 Points 43 Location NY Apr 19, 2018 #4 To get from extract efficiency (coarse grind) to PPG, multiply the percentage value by 46. e.g. if the malt analysis shows 79%, 0.79 x 46 = 36 PPG This has to be entered as a custom fermentable
To get from extract efficiency (coarse grind) to PPG, multiply the percentage value by 46. e.g. if the malt analysis shows 79%, 0.79 x 46 = 36 PPG This has to be entered as a custom fermentable