- Joined
- Aug 19, 2012
- Messages
- 2,830
- Reaction score
- 4,436
- Points
- 113
https://www.brewersfriend.com/homebrew/recipe/edit/1473547
A quickie stovetop for my Son in law. I call him Buck!
A quickie stovetop for my Son in law. I call him Buck!
I wasn't sure what his plan was for last night, so I just guessed a batch sparge.I assume BIAB, yes?
Do you drain, then add sparge water, or do you remove grains and drop them into a bucket to sparge?
I like the recipe
On a home setting the hops just get added when the target temp is hit. Stirred for a couple of minutes and then left alone until the stand is over. Then chilling is resumedThats pretty close to my standard golden lager! Interesting to bump it up to 7%!
https://www.brewersfriend.com/homebrew/recipe/embed/1427656
When you say hop stand what do you mean? when i write my recipes, i like to add whirlpool hops, I toss them in when i kick on the whirlpool(depending on the temp).
I toss a lot of 0 min hops or flameout hops, but i have not found a good way of accounting for them in this software. I generally drop my whirlpool down to 185 and spin it for 20 mins, rest it for 20 and then knock it. I call it whirlpool and adjust the temp up to 212 but i dont add a time(it only gives me about 5% usage on them). Would it make sense to call them something different?
since i toss the hops at 212 and immediately start the cooling(down to 185). I wonder how to add that to judge the IBU pickup? My whirlpool is spinning the entire time(20 mins total). It generally takes 10 mins to go from 212 to 185(depending on my street water temp). So maybe i should call the 185 addition a hop stand for 10 mins and the flame out addition a hop stand for 20 min @ 185.On a home setting the hops just get added when the target temp is hit. Stirred for a couple of minutes and then left alone until the stand is over. Then chilling is resumed
I think it's not so much about ibu but rather flavor, I've found adding the hops at 170 then whirlpooling gives a better flavor, i've even tried it at 145 and much better flavorsince i toss the hops at 212 and immediately start the cooling(down to 185). I wonder how to add that to judge the IBU pickup? My whirlpool is spinning the entire time(20 mins total). It generally takes 10 mins to go from 212 to 185(depending on my street water temp). So maybe i should call the 185 addition a hop stand for 10 mins and the flame out addition a hop stand for 20 min @ 185.
I will do that for a couple known recipes and see how it changes things.