- Joined
- Nov 1, 2017
- Messages
- 5
- Reaction score
- 1
- Points
- 3
*NEVER MIND* - figured it out, just adjust the batch size to account for losses after primary (i.e. for my equipment profile, I need to change it to 5.65 gallons to end up bottling 5 gallons, based on estimated racking and spillage losses).
Heyo.
Is there a way to adjust brewersfriend for losses after primary fermentation (i.e. trub losses when racking, spillage during bottling, etc).
I built a spreadsheet that works backwards from bottling to determine the volume required in primary, and all the way back to strike water, but BF doesn't (as far as I can tell) account for any losses after ptimary. SO I end up with different numbers in BF and my spreadhseet. I'd like to get them to align.
Thanks.
Heyo.
Is there a way to adjust brewersfriend for losses after primary fermentation (i.e. trub losses when racking, spillage during bottling, etc).
I built a spreadsheet that works backwards from bottling to determine the volume required in primary, and all the way back to strike water, but BF doesn't (as far as I can tell) account for any losses after ptimary. SO I end up with different numbers in BF and my spreadhseet. I'd like to get them to align.
Thanks.
Last edited: