- Joined
- Dec 16, 2023
- Messages
- 32
- Reaction score
- 36
- Points
- 18
I right I'm doing extract but am thinking about getting into all grain. What I'm reading all grain using a mash tun is the way to go (for me). I really only would want to do 5 gallon brews.
I think the least expensive way is to build a mash tun from an 10g igloo.
Right now I have a 10 g SS kettle with no spigot.
So my question is really about adding a spigot. I don't want to ruin my kettle doing it wrong. So I figure there is two ways to add it. Drill a 1/2" hole or use a Greenlee hole punch.
I think the hole punch route would be preferred but I would have to buy the punch. Or do you think that drilling 1/2" through SS with a hand drill would work fine.
I think the least expensive way is to build a mash tun from an 10g igloo.
Right now I have a 10 g SS kettle with no spigot.
So my question is really about adding a spigot. I don't want to ruin my kettle doing it wrong. So I figure there is two ways to add it. Drill a 1/2" hole or use a Greenlee hole punch.
I think the hole punch route would be preferred but I would have to buy the punch. Or do you think that drilling 1/2" through SS with a hand drill would work fine.