fireside - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

fireside

182 calories 19 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: No Profile Selected
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Post Boil Size: 1.5 gallons
Pre Boil Gravity: 1.111 (recipe based estimate)
Post Boil Gravity: 1.185 (recipe based estimate)
Efficiency: 75% (steeping grains only)
Calories: 182 calories (Per 12oz)
Carbs: 19 g (Per 12oz)
Created: Monday December 30th 2019
1.055
1.014
5.5%
49.2
9.9
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Briess - LME Pale Ale6 lb LME Pale Ale 34.5 6 75%
1 lb Briess - DME Bavarian Wheat1 lb DME Bavarian Wheat 44.6 3 12.5%
7 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 40L1 lb Caramel / Crystal 40L 34 40 12.5%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Summit1 oz Summit Hops Pellet 18.5 Boil 60 min 40.7 50%
0.50 oz Centennial0.5 oz Centennial Hops Pellet 10 Boil 30 min 8.45 25%
0.50 oz Centennial0.5 oz Centennial Hops Pellet 10 Boil 0 min 25%
2 oz / 0.00
 
Yeast
Wyeast - London Ale 1028
Amount:
1 Each
Cost:
Attenuation (avg):
75%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 90 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 2.61 g | 10.5 qt) 2.04 8.2  
Mash volume with grains (equipment estimates 2.61 g | 10.5 qt) 2.12 8.5  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.59 2.3  
Pre boil volume (equipment estimates 3.08 g | 12.3 qt) 2.5 10  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 1.5 6  
Top off amount 3.5 14  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 5.54 22.2
Equipment Profile Used: System Default
 
Notes

1/2 tsp of nutmeg, cinnamon, ginger, cloves and 1 oz of honey at flameout

Last Updated and Sharing
 
171
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-12-30 14:12 UTC