Mash the crushed grains at 150°F (66°C) for 60 minutes. I use the rate of 1 pound (454 g) of crushed grain per quart (946 ml) of water that is heated to 15°F (8°C) higher than my targeted mash temperature because there will be about a 15°F (8°C) drop in temperature when the grains are added. Mix well and adjust the mash to the chosen temperature with hot or cold water. Mash in an insulated vessel for 60 minutes. Vorlauf until the wort runs clear. Sparge with 168°F (76°C) water until you get 6 gallons (22.7 l), which will be boiled down to 5 gallons (19 l). Boil the wort for 60 minutes following the hops schedule. After chilling the wort to below 80°F (27°C), pitch the yeast.

Ferment at the recommended temperature for your yeast strain (refer to the yeast lab specs, roughly 65–70°F/18–21°C). Transfer the beer to a secondary fermentor after 10 days of primary fermentation. Continue fermenting at 65–70°F (18–21°C) until all signs of fermentation are gone, usually another 2 weeks. On bottling day, condition with ¾ cup of corn sugar (dextrose) or 1¼ cup of dry malt extract (DME). Rest bottles at 65–70°F (18–21°C) for 10 days until you achieve carbonation. Then enjoy.