Brewer's Friend

Print

Light Ale

215 calories 21.3 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Blonde Ale
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Pre Boil Gravity: 1.130 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 215 calories (Per 12oz)
Carbs: 21.3 g (Per 12oz)
Created: Saturday November 23rd 2013
1.065
1.015
6.5%
9.0
5.2
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Liquid Malt Extract - Extra Light6 lb Liquid Malt Extract - Extra Light 37 2.5 66.7%
2 lb Corn Sugar - Dextrose2 lb Corn Sugar - Dextrose 46 0.5 22.2%
8 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb United Kingdom - Crystal 15L1 lb Crystal 15L 34 15 11.1%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Cascade0.5 oz Cascade Hops Pellet 7 Boil 60 min 6.46 33.3%
1 oz Cascade1 oz Cascade Hops Pellet 7 Aroma 5 min 2.58 66.7%
1.50 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 each Whirfloc Other Boil 15 min.
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
No
Fermentation Temp:
61 °F
Pitch Rate:
-
$ 0.00 Yeast Pitch Rate and Starter Calculator
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.04 g | 24.1 qt) 1.98 7.9  
Mash volume with grains (equipment estimates 6.04 g | 24.1 qt) 2.06 8.2  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.64 2.6  
Pre boil volume (equipment estimates 6.56 g | 26.2 qt) 2.5 10  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.06 -0.2  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 1.98 7.9
Equipment Profile Used: System Default
 
Notes

This is a very nice drinking ale. Ready to bottle or keg in 8 to 10 days but I always follow 1wk primary, 2wks secondary,(you must let the yeast finish and this is where the beer becomes crystal clear) then keg or bottle....If you bottle, let it sit for 2 to 3 weeks minimum. It will be worth the wait! also used 1 whole Whirfloc tablet. All my friends loved this one. Be careful! this stuff will sneak up on you! Prime with 4oz. priming sugar as usual.

Last Updated and Sharing
 
1,884
Views
2
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2014-02-23 12:37 UTC