Damnation Clone - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Damnation Clone

229 calories 18.2 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: Belgian Golden Strong Ale
Boil Time: 90 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.051 (recipe based estimate)
Efficiency: 75% (brew house)
Calories: 229 calories (Per 12oz)
Carbs: 18.2 g (Per 12oz)
Created: Wednesday January 31st 2018
1.070
1.010
7.8%
26.6
7.5
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
11 lb Belgian - Pilsner11 lb Pilsner 37 1.6 81.5%
1 lb German - Pale Wheat1 lb Pale Wheat 39 1.5 7.4%
1 lb Belgian - Aromatic1 lb Aromatic 33 38 7.4%
0.50 lb Corn Sugar - Dextrose0.5 lb Corn Sugar - Dextrose 46 0.5 3.7%
13.50 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
50 g Styrian Goldings50 g Styrian Goldings Hops Pellet 2.6 Boil 90 min 16.8 54.5%
35 g Saaz35 g Saaz Hops Pellet 3 Boil 30 min 9.75 38.2%
6.70 g Styrian Goldings6.7 g Styrian Goldings Hops Pellet 2.6 Boil 0 min 7.3%
91.70 g / $ 0.00
 
Yeast
Wyeast - Belgian Ale 1214
Amount:
1 Each
Cost:
Attenuation (custom):
85%
Flocculation:
Med-Low
Optimum Temp:
68 - 78 °F
Starter:
Yes
Fermentation Temp:
72 °F
Pitch Rate:
1.25 (M cells / ml / ° P) 444 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Light colored and malty
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
60 5 10 95 55 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
Warmer to balance out dryness that will come from the sugar. This prevents it from tasting too cidery. Infusion -- 154 °F 90 min
Starting Mash Thickness: 1.25 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.25 qt/lb 4.06 16.3  
Mash volume with grains 5.1 20.4  
Grain absorption losses -1.63 -6.5  
Remaining sparge water volume (equipment estimates 5.65 g | 22.6 qt) 5.28 21.1  
Mash Lauter Tun losses -0.25 -1  
Volume increase from sugar/extract (early additions) 0.04 0.1  
Pre boil volume (equipment estimates 7.87 g | 31.5 qt) 7.5 30  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.12 -0.5  
Post boil Volume 5.5 22  
Going into fermentor 5.5 22  
Total: 9.34 37.4
Equipment Profile Used: System Default
 
Notes

Sub yeast: WLP 500 (Monestary Ale)

Pitch the yeast with the wort temperature at or just below the minimum recommended temperature (65F) and let it rise slowly over the next 4 days to the high end of the range (upper 70s). This will help balance the variety of flavors that a particular yeast is capable of producing at different temperatures. Yeast can generate heat up to 7-9 degrees above the ambient temperature during fermentation, so you need to keep the ambient temperature below the minimum fermentation temperature for the first couple of days so the wort does not get too warm too fast.

Last Updated and Sharing
 
1,629
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2018-02-13 18:35 UTC