Aidan IPA - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Aidan IPA

231 calories 21.3 g 12 oz
Beer Stats
Method: All Grain
Style: American IPA
Boil Time: 90 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.046 (recipe based estimate)
Efficiency: 75% (brew house)
Source: Cass Palmer
Calories: 231 calories (Per 12oz)
Carbs: 21.3 g (Per 12oz)
Created: Tuesday August 2nd 2016
1.070
1.014
7.3%
61.3
9.3
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
10 lb American - Pale 2-Row10 lb Pale 2-Row 37 1.8 78.4%
2 lb American - Munich - Dark 20L2 lb Munich - Dark 20L 33 20 15.7%
12 oz Canadian - Honey Malt12 oz Honey Malt 37 25 5.9%
12.75 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Centennial1 oz Centennial Hops Pellet 10 First Wort 0 min 15.69 12.5%
1 oz Centennial1 oz Centennial Hops Pellet 10 Boil 20 min 15.69 12.5%
2 oz Centennial2 oz Centennial Hops Pellet 10 Boil 5 min 14.98 25%
1 oz Centennial1 oz Centennial Hops Pellet 10 Whirlpool at 190 °F 30 min 14.98 12.5%
3 oz Centennial3 oz Centennial Hops Pellet 10 Dry Hop 5 days 37.5%
8 oz / 0.00
 
Yeast
Mangrove Jack - US West Coast Yeast M44
Amount:
1 Each
Cost:
Attenuation (avg):
78%
Flocculation:
High
Optimum Temp:
59 - 74 °F
Starter:
No
Fermentation Temp:
72 °F
Pitch Rate:
0.75 (M cells / ml / ° P) 242 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Light colored and hoppy
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 5 10 50 150 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
4.6 gal Sparge -- 150 °F 60 min
Starting Mash Thickness: 1.3 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.3 qt/lb 4.14 16.6  
Mash volume with grains 5.16 20.7  
Grain absorption losses -1.59 -6.4  
Remaining sparge water volume (equipment estimates 5.14 g | 20.6 qt) 5.2 20.8  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.44 g | 29.8 qt) 7.5 30  
Boil off losses -2.25 -9  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil Volume 5.04 20.2  
Hops absorption losses (whirlpool, hop stand) -0.04 -0.2  
Going into fermentor 5 20  
Total: 9.34 37.4
Equipment Profile Used: System Default
 
Notes

Three temperature profiles that seem to be popular among homebrewers are just off boil range 190–212 °F (88–100 °C), the sub-isomerization range 160–170 °F (71–77 °C), and a tepid hop stand range 140–150 °F (60–66 °C). The 190–212 °F (88–100 °C) range will allow essential oils with higher flashpoints an easier time to solubulize into the wort and also will allow some alpha acid isomerization to occur with the best estimates of between 5–15% utilization. Some homebrewers will keep their kettle burner on low to keep the temperature of the wort elevated above 200 °F (93 °C) during their extended hop stands which would better emulate the conditions in commercial whirlpools. A hop stand in the 160–170 °F (71–77 °C) range will basically shut down the alpha acid isomerization reaction and the lower temperatures will reduce the vaporization of the essential oils. Homebrewers can use their wort chillers to bring the wort down to this range before adding the knockout hops or they can add a second dose of knockout hops. The 140–150 °F (60–66 °C) range will once again reduce vaporization of the low flashpoint oils, but may take longer to get the same amount of essential oils extracted.

Last Updated and Sharing
 
665
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2016-09-20 12:32 UTC