Nugget Nectar Clone (extract) - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Nugget Nectar Clone (extract)

184 calories 16.9 g 12 oz
Beer Stats
Method: Extract
Style: Specialty IPA: Red IPA
Boil Time: 60 min
Batch Size: 5.25 gallons (fermentor volume)
Pre Boil Size: 3.5 gallons
Pre Boil Gravity: 1.084 (recipe based estimate)
Post Boil Gravity: 1.056 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Calories: 184 calories (Per 12oz)
Carbs: 16.9 g (Per 12oz)
Created: Tuesday August 9th 2022
1.056
1.011
5.9%
44.2
12.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
3.30 lb Briess - LME Pilsen Light3.3 lb LME Pilsen Light 37.6 2 40.7%
3.30 lb Briess - LME Munich3.3 lb LME Munich 34.5 8 40.7%
1 lb US - Brewers Crystals1 lb Brewers Crystals 44 2 12.3%
7.60 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
8 oz American - Caramel / Crystal 120L8 oz Caramel / Crystal 120L 33 120 6.2%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Nugget1 oz Nugget Hops Pellet 14 Boil 60 min 37.39 33.3%
1 oz Simcoe1 oz Simcoe Hops Pellet 12.7 Boil 5 min 6.76 33.3%
1 oz Simcoe1 oz Simcoe Hops Pellet 12.7 Dry Hop 7 days 33.3%
3 oz / 0.00
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
1 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 96 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: dextrose       Amount: 5 oz       Temp: 68 °F       CO2 Level: 2.65 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.26 g | 25 qt) 2.93 11.7  
Mash volume with grains (equipment estimates 6.26 g | 25 qt) 2.97 11.9  
Grain absorption losses (steeping) -0.06 -0.3  
Volume increase from sugar/extract (early additions) 0.63 2.5  
Pre boil volume (equipment estimates 6.83 g | 27.3 qt) 3.5 14  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.08 -0.3  
Post boil volume 5.25 21  
Going into fermentor 5.25 21  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 2.93 11.7
Equipment Profile Used: System Default
 
Notes

Ferment 3 weeks. Dry hop 4 days before bottling.

Last Updated and Sharing
 
229
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-08-11 01:12 UTC