- Joined
- Apr 29, 2014
- Messages
- 2
- Reaction score
- 0
- Points
- 0
Hi BrewersFriend.
First: great site - love it.
Second: I wanted to adjust my fermentables as I think your German Pale Ale is a bit high on PPG (at least compared to Bestmalz own stats which I'm using), its even higher than your Wheat malt PPG(!)... anyways: when I add custom fermentable and plot in PPG and Lovibond, the OG goes through the roof - same amount of malt (4 kilos in my recipe) and even lower PPG. I then removed it and added custom again and used the same numbers as you are using (39 PPG), and the OG is still way higher... so unless I've missed something it seems there some calculation errors there? I'll upload screenshots so you know what I'm talking about.
Thanks in advance for any help
Best regards
First: great site - love it.
Second: I wanted to adjust my fermentables as I think your German Pale Ale is a bit high on PPG (at least compared to Bestmalz own stats which I'm using), its even higher than your Wheat malt PPG(!)... anyways: when I add custom fermentable and plot in PPG and Lovibond, the OG goes through the roof - same amount of malt (4 kilos in my recipe) and even lower PPG. I then removed it and added custom again and used the same numbers as you are using (39 PPG), and the OG is still way higher... so unless I've missed something it seems there some calculation errors there? I'll upload screenshots so you know what I'm talking about.
Thanks in advance for any help
Best regards