St Peter's Pilsner - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

St Peter's Pilsner

173 calories 15.7 g 12 oz
Beer Stats
Method: Extract
Style: Czech Pale Lager
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2 gallons
Pre Boil Gravity: 1.132 (recipe based estimate)
Efficiency: 35% (steeping grains only)
Calories: 173 calories (Per 12oz)
Carbs: 15.7 g (Per 12oz)
Created: Saturday July 6th 2019
1.053
1.010
5.7%
17.3
8.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Dry Malt Extract - Light6 lb Dry Malt Extract - Light 42 4 85.7%
6 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb American - Caramel / Crystal 40L1 lb Caramel / Crystal 40L 34 40 14.3%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Saaz1 oz Saaz Hops Pellet 3.5 Boil 15 min 3.16 33.3%
1 oz Saaz1 oz Saaz Hops Pellet 3.5 Boil 2 min 0.54 33.3%
1 oz Perle1 oz Perle Hops Extract 8.2 Boil 60 min 13.57 33.3%
3 oz / 0.00
 
Yeast
Fermentis - Saflager - German Lager Yeast S-23
Amount:
1 Each
Cost:
Attenuation (avg):
82%
Flocculation:
High
Optimum Temp:
48 - 72 °F
Starter:
No
Fermentation Temp:
63 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 87 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: dextrose       Amount: 4.1 oz       Temp: 68 °F       CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.27 g | 25.1 qt) 1.66 6.6  
Mash volume with grains (equipment estimates 6.27 g | 25.1 qt) 1.74 7  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.47 1.9  
Pre boil volume (equipment estimates 6.61 g | 26.5 qt) 2 8  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 1.66 6.6
Equipment Profile Used: System Default
"St Peter's Pilsner" Czech Pale Lager beer recipe by imorgan67. Extract, ABV 5.68%, IBU 17.26, SRM 8.58, Fermentables: (Dry Malt Extract - Light) Steeping Grains: (Caramel / Crystal 40L) Hops: (Saaz, Perle)
Last Updated and Sharing
 
220
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-07-06 23:49 UTC