Brew26 - Taipari Pils1 - 24/01/20 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Brew26 - Taipari Pils1 - 24/01/20

176 calories 15 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: German Pilsner (Pils)
Boil Time: 90 min
Batch Size: 20 liters (fermentor volume)
Pre Boil Size: 28 liters
Post Boil Size: 22 liters
Pre Boil Gravity: 1.042 (recipe based estimate)
Post Boil Gravity: 1.054 (recipe based estimate)
Efficiency: 75% (brew house)
Calories: 176 calories (Per 12oz)
Carbs: 15 g (Per 12oz)
Created: Tuesday January 21st 2020
1.054
1.009
5.9%
42.5
3.2
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
4.50 kg German - Pilsner4.5 kg Pilsner 38 1.6 100%
4.50 kg / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
30 g Saaz30 g Saaz Hops Pellet 3.5 Boil at 100 °C 90 min 15.31 50%
10 g Pacific Gem10 g Pacific Gem Hops Pellet 15.4 Boil at 100 °C 90 min 22.45 16.7%
20 g Saaz20 g Saaz Hops Pellet 3.5 Boil at 100 °C 15 min 4.73 33.3%
60 g / $ 0.00
 
Yeast
Fermentis - Saflager - German Lager Yeast W-34/70
Amount:
1 Each
Cost:
Attenuation (avg):
83%
Flocculation:
High
Optimum Temp:
9 - 22 °C
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 93 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
12 L Infusion 67 °C 67 °C 90 min
Starting Mash Thickness: 2.66 L/kg
Starting Grain Temp: 18 °C
Quick Water Requirements
Water Liters
Strike water volume at mash thickness of 2.7 L/kg 12
Mash volume with grains 14.9
Grain absorption losses -4.5
Remaining sparge water volume (equipment estimates 22.3 L) 21.4
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 28.9 L) 28
Boil off losses -8.6
Hops absorption losses (first wort, boil, aroma) -0.3
Post boil Volume (equipment estimates 20 L) 22
WARNING: Exceeded batch size - reduce boil size  
Going into fermentor (equipment estimates 22 L) 20
Total: 33.4  
Equipment Profile Used: System Default
 
Notes

Friday 24th Jan. Mash start 0820 with 4.5kg Weyermann Pilsiner malt in 12 litres water at 67C.
Start sparge 0950 collect initial 20L add another 8L.
Start heat at 1010, boiling at 1040. Add 10gms Pacific Gem and 30gms Saaz in spider at 1045. Cooling coil in at 1140.
Add 20 gms Saaz at 12.00. Flame out at 1215. Start cooling 1215.
34C at 1300 giving OG1054-55 = 1052-53. Close to 75% efficiency.
Start runoff to MJ2 Fermenter at 1305. Collect 20L and into fridge set 12C at 1445.
Boiled and cooled water 20C for yeast saturation. Yeast into water at 1545
Yeast pitched at 1945 - wort ( in fermenter ) temp 22C.
Fridge temp 12C. Go Taipari Pils no1.
Sat 25th 0900 starting to slowly bubble every 30secs?? At 1200 every 7-10 secs. At 1530 every 6 secs.
Sun 26th bubbling every 6-8 secs.
Tue 28th still bubbling well every 4-6 secs - tastes good although slightly sulphury smell in fridge??
Wed 29th still bubbling every 4-6 secs and still suphur smell???
Thu 30/1 still bubbling well every 4-5 secs. Tasting ok some sulphur smell still.
Fri 31/1 still bubbling 5-6 secs tasting good still slight sulphur smell in fridge.
Sun 2/2 bubbling slowed to every 10+secs still tasting good.
Monday 3rd 1410 raise temp to 15C for Diacetyl Rest.
Thursday 6th 0700 drop temp to 10C to start lagering process.
Sunday 9th drop temp to 9C - tasting very good.
Monday rack into cleaned and sterilised MJ1. Gravity appears to be still up around 1025-30 so add a little of original yeast from bottom of MJ2 and 1/2 cup sugar to hopefully kick things along a bit. Set temp to 12C. An hour later slight bubbling so fingers crossed.
Tue 11/2 slight bubbling and tastes good.
Monday 17/2 add MJ Dry Enzyme in 250ml hot water and stir well ( advice from Bryan Brewers Coop ) - raise temp to 15C.

Last Updated and Sharing
 
223
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-03-21 20:36 UTC