Pils - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Pils

154 calories 14 g 12 oz
brewer logo
Beer Stats
Method: Extract
Style: Czech Pale Lager
Boil Time: 60 min
Batch Size: 5 gallons (fermentor volume)
Pre Boil Size: 2 gallons
Pre Boil Gravity: 1.118 (recipe based estimate)
Post Boil Gravity: 1.047 (recipe based estimate)
Efficiency: 70% (steeping grains only)
Calories: 154 calories (Per 12oz)
Carbs: 14 g (Per 12oz)
Created: Monday July 6th 2020
1.047
1.009
5.1%
21.2
3.0
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Liquid Malt Extract - Pilsen6 lb Liquid Malt Extract - Pilsen 35 2 85.7%
6 lbs / $ 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb German - Pilsner1 lb Pilsner 38 1.6 14.3%
$ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Saaz2 oz Saaz Hops Pellet 3.5 Boil 60 min 14.4 50%
1 oz Saaz1 oz Saaz Hops Pellet 3.5 Boil 15 min 3.57 25%
1 oz Saaz1 oz Saaz Hops Leaf/Whole 3.5 Boil 15 min 3.25 25%
4 oz / $ 0.00
 
Yeast
Fermentis - Saflager - German Lager Yeast S-23
Amount:
1 Each
Cost:
Attenuation (avg):
82%
Flocculation:
High
Optimum Temp:
48 - 72 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 77 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: dextrose       Amount: 4.1 oz       Temp: 68 °F       CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Quick Water Requirements
Water Gallons  Quarts
Heat water added to kettle (equipment estimates 6.27 g | 25.1 qt) 1.62 6.5  
Mash volume with grains (equipment estimates 6.27 g | 25.1 qt) 1.7 6.8  
Grain absorption losses (steeping) -0.13 -0.5  
Volume increase from sugar/extract (early additions) 0.51 2  
Pre boil volume (equipment estimates 6.65 g | 26.6 qt) 2 8  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.15 -0.6  
Post boil volume 5 20  
Going into fermentor 5 20  
WARNING: Kettle losses > 2% detected which throw off OG calculation for extract/partial mash recipes in batch target 'fermentor' mode. Solution: Reduce kettle losses, misc losses and hops absorption in equipment profile, OR set batch target to 'kettle' and do a full wort boil. See batch target FAQ.    
Total: 1.62 6.5
Equipment Profile Used: System Default
 
Notes

Boiled with 3lb LME, added rest at end of boil and mixed well.

OG was 1040, maybe a difference in locally-sourced grain/LME.

Pitched yeast @78, fermenting @72. Fermentation visible < 14 hours.

Last Updated and Sharing
 
171
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-07-06 17:13 UTC