Hops
|
Amount
|
Variety
|
Cost
|
Type
|
AA
|
Use
|
Time
|
IBU
|
Bill %
|
|
60 g |
Mosaic60 g Mosaic Hops |
|
Pellet |
12 |
Boil
|
60 min |
45.78 |
15% |
|
100 g |
Cascade100 g Cascade Hops |
|
Pellet |
8.8 |
Hop Stand at 65 °C
|
5 min |
1 |
25% |
|
40 g |
Mosaic40 g Mosaic Hops |
|
Pellet |
12 |
Hop Stand at 65 °C
|
5 min |
0.55 |
10% |
|
100 g |
Cascade100 g Cascade Hops |
|
Pellet |
8.8 |
Dry Hop at 18 °C
|
14 days |
|
25% |
|
100 g |
Mosaic100 g Mosaic Hops |
|
Pellet |
8.8 |
Dry Hop at 18 °C
|
14 days |
|
25% |
|
400 g
/ $ 0.00
|
Mash Guidelines
|
Amount
|
Description
|
Type
|
Start Temp
|
Target Temp
|
Time
|
|
35 L |
|
Strike |
71 °C |
66 °C |
10 min |
|
|
|
Infusion |
66 °C |
66 °C |
80 min |
|
55 L |
|
Fly Sparge |
76 °C |
76 °C |
40 min |
Starting Mash Thickness:
3.5 L/kg
Starting Grain Temp:
21 °C |
Priming
|
Method: co2
CO2 Level: 2.25 Volumes |
Target Water Profile
Glen Alvie, Rain Water
Notes
****Current notes******
Next Brew Notes:
- Colour is more Amber than Pale. Use less Crystal Medium next time.
- For Dry Hopping and Hop Stands we probably need to Target Atleast 68-70L with 1.5 Hour Boil to get enough for Two full kegs.
- Mashed out to target 77C, but keep raising the kettle to 83-85C to maintain sparging temp, it always drops.
- Get the mash Temp right and the kettle temp right before Mashing. I think just leaving some head room in the kettle to add cold water would be better. Kettle should sit about 1C above the Mash.
Brew notes:
- PH was spot on. 5.3-4.
3.5L/kg was fine and didn’t need to top up kettle. Probably had about 4 litres left over. 35L+55L in kettle. 90L total water needed.
Boiled down from 75, the original target of 68-70 would have been fine.
Mashed out, but should of raised the kettle to 80-85C to maintain sparging temp, it always drops.
Boiled for 1.2 hours, before adding hops.
Colour is more Amber than Pale. Use less Crystal Medium next time.
_prevouse notrs___
Boiled down to about 58/59 from 65L over 1 hour.
Removed hops and run through chiller. Ended up at 52L. Final amount 47L.
Replace kk thermo
Ph first reading 5.1-2. Needed to add some bicarbonate. 2g to bring it to 5.3.
Mash temp was too high at start 68C
Kegging notes
- add metabusinmate after beer
- need longer line
- extend out sinker
-previous notes-
Empty out boil hops before adding whirlpool hops
Note slightly higher 3L mash to weight ratio.
PREVIOUS BREW NOTES_
Mash ph was spot on 5.3 first reading. After sparge 5.4.
Mashed 65C
Sparged 77. Did a quicker sparge flow.
Probably needed about 10L additional water on top of the existing 50L liquor tank
Boiled down for 1 hour until we reached 53L boiled an extra 30mins and got down to 43L
3L x grain weight water ratio.
Ferment at 20C Saturday night. Lifted to 24C on Monday afternoon when bubbling was slowing.
Last Updated and Sharing
- Public: Yup, Shared
- Last Updated: 2026-03-20 01:34 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
|
Cost $ |
Cost % |
| Fermentables |
$ |
|
Steeping Grains
(Extract Only) |
$ |
|
| Hops |
$ |
|
| Yeast |
$ |
|
| Other |
$ |
|
| Cost Per Barrel |
$ 0.00 |
|
| Cost Per Pint |
$ 0.00 |
|
| Total Cost |
$ 0.00 |
|
Discussion about this recipe:
Recipe Tools ▼
Brew!