21B4a. Specialty IPA - Red #1 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

21B4a. Specialty IPA - Red #1

221 calories 21.6 g 12 oz
Beer Stats
Method: All Grain
Style: Specialty IPA: Red IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7.5 gallons
Post Boil Size: 6 gallons
Pre Boil Gravity: 1.044 (recipe based estimate)
Post Boil Gravity: 1.055 (recipe based estimate)
Efficiency: 75% (brew house)
Source: WAWooldridge
Calories: 221 calories (Per 12oz)
Carbs: 21.6 g (Per 12oz)
Created: Wednesday August 30th 2017
1.067
1.015
6.9%
67.5
13.9
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
12 lb American - Pale 2-Row12 lb Pale 2-Row 37 1.8 74.1%
12 oz American - Caramel / Crystal 40L12 oz Caramel / Crystal 40L - (late boil kettle addition) 34 40 4.6%
12 oz American - Caramel / Crystal 120L12 oz Caramel / Crystal 120L - (late boil kettle addition) 33 120 4.6%
2.70 lb Rice Hulls2.7 lb Rice Hulls 0 0 16.7%
16.20 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Eureka0.5 oz Eureka Hops Pellet 18.5 Boil 60 min 33.61 10%
0.75 oz Eureka0.75 oz Eureka Hops Pellet 18.5 Boil 10 min 18.28 15%
1 oz Eureka1 oz Eureka Hops Pellet 18.5 Boil 5 min 13.4 20%
0.75 oz Eureka0.75 oz Eureka Hops Pellet 18.5 Boil 1 min 2.17 15%
2 oz Eureka2 oz Eureka Hops Pellet 18.5 Dry Hop 7 days 40%
5 oz / 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
1 tsp Irish Moss Fining Boil 15 min.
1.34 g Calcium Chloride (dihydrate) Water Agt Mash 1 hr.
8 g Gypsum Water Agt Mash 1 hr.
0.61 g Magnesium Chloride Water Agt Mash 1 hr.
5.62 ml Phosphoric acid Water Agt Mash 1 hr.
6.92 ml Phosphoric acid Water Agt Sparge 1 hr.
 
Yeast
White Labs - California Ale Yeast WLP001
Amount:
1 Each
Cost:
Attenuation (avg):
76.5%
Flocculation:
Medium
Optimum Temp:
68 - 73 °F
Starter:
Yes
Fermentation Temp:
70 °F
Pitch Rate:
1.25 (M cells / ml / ° P) 426 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.5 Volumes
 
Target Water Profile
Light colored and hoppy
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
75 5 10 50 150 0
Rice Hulls:
Add 1lb for every 5lbs malt to help with heat distribution.

Crystal Malts:
Add after mash-out, during vorlauf.

Condition at least 4 weeks.

70◦F until kraeusen falls through (about 9 days). Transfer to secondary fermentor. Add dry hops and ferment for about another 7 days.
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
5.06 gal Single Infusion Infusion -- 152 °F 90 min
4.43 gal Batch Sparge Sparge -- 170 °F 5 min
Starting Mash Thickness: 1.5 qt/lb
Quick Water Requirements
Water Gallons  Quarts
Strike water volume at mash thickness of 1.5 qt/lb 6.08 24.3  
Mash volume with grains 7.37 29.5  
Grain absorption losses -2.03 -8.1  
Remaining sparge water volume (equipment estimates 3.31 g | 13.3 qt) 3.7 14.8  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 7.11 g | 28.5 qt) 7.5 30  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.11 -0.5  
Post boil Volume (equipment estimates 5.5 g | 22 qt) 6 24  
WARNING: Exceeded batch size - reduce boil size    
Going into fermentor (equipment estimates 6 g | 24 qt) 5.5 22  
Total: 9.78 39.1
Equipment Profile Used: System Default
 
Notes

Overall Impression:
Hoppy, bitter, and moderately strong like an American IPA, but with some caramel, toffee, and/or dark fruit malt character. Retaining the dryish finish and lean body that makes IPAs so drinkable, a Red IPA is a little more flavorful and malty than an American IPA without being sweet or heavy.

Aroma:
A moderate to strong fresh hop aroma featuring one or more characteristics of American or New World hops, such as tropical fruit, stone fruit, citrus, floral, spicy, berry, melon, pine, resinous, etc. Many versions are dry hopped and can have an additional fresh hop aroma; this is desirable but not required. Grassiness should be minimal, if present. A medium-low to medium malty-sweet aroma mixes in well with the hop selection, and often features caramel, toffee, toasty, and/or dark fruit character. Fruitiness from yeast may also be detected in some versions, although a neutral fermentation character is also acceptable. A restrained alcohol note may be present, but this character should be minimal at best. Any American or New World hop character is acceptable; new hop varieties continue to be released and should not constrain this style.

Appearance:
Color ranges from light reddish-amber to dark reddish-copper. Should be clear, although unfiltered dry-hopped versions may be a bit hazy. Medium-sized, off-white to cream-colored head with good persistence.

Flavor:
Hop flavor is medium to very high, and should reflect an American or New World hop character, such as citrus, floral, pine, resinous, spicy, tropical fruit, stone fruit, berry, melon, etc. Medium-high to very high hop bitterness. Malt flavor should be medium-low to medium, and is generally clean but malty-sweet up front with medium-dark caramel, toffee, toasty and/or dark fruit malt flavors. The character malt choices and the hop selections should complement and enhance each other, not clash. The level of malt flavor should not adversely constrain the hop bitterness and flavor presentation. Low yeast-derived fruitiness is acceptable but not required. Dry to medium-dry finish; residual sweetness should be medium-low to none. The bitterness and hop flavor may linger into the aftertaste but should not be harsh. A very light, clean alcohol flavor may be noted in stronger versions.

Mouthfeel:
Medium-light to medium body, with a smooth texture. Medium to medium-high carbonation. No harsh hop-derived astringency. Very light, smooth alcohol warming not a fault if it does not intrude into overall balance.

Comments:
Previously might have been a sub-genre of American Amber Ales or Double Red Ales, hoppier and stronger than the normal products, but still maintaining the essential drinkability by avoiding sweet flavors or a heavy body or finish.

History:
A modern American craft beer style, based on American IPA but with the malt flavors of an American Amber Ale.

Characteristic Ingredients:
Like an American IPA, but with medium or dark crystal malts, possibly some character malts with a light toasty aspect. May use sugar adjuncts. American or New World finishing hops with tropical, fruity, citrusy, piney, berry, or melon aspects; the choice of hops and character malts is synergistic – they must complement each other and not clash.

Style Comparison:
Like the difference between an American Amber Ale and an American Pale Ale, a Red IPA will differ from an American IPA with the addition of some darker crystal malts giving a slightly sweeter, more caramelly and dark fruit-based balance. A Red IPA differs from an American Strong Ale in that the malt profile is less intense and there is less body; a Red IPA still has an IPA balance and doesn’t trend towards a barleywine-like malt character. A Red IPA is like a stronger, hoppier American Amber Ale, with the characteristic dry finish, medium-light body, and strong late hop character.

Vital Statistics:
OG: 1.056 – 1.070
FG: 1.008 – 1.016
IBUs: 40 – 70
SRM: 11 – 19
ABV: 5.5 – 7.5%

Commercial Examples:
Green Flash Hop Head Red Double Red IPA (double), Midnight Sun Sockeye Red, Sierra Nevada Flipside Red IPA, Summit Horizon Red IPA, Odell Runoff Red IPA

Tags:
high-strength, amber-color, top-fermented, north-America, craft-style, ipa-family, specialty-family, bitter, hoppy

Last Updated and Sharing
 
723
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-10-29 21:27 UTC