Mujoose #9 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Mujoose #9

1 calories 0.1 g 1.25 ml
brewer logo
Beer Stats
Method: All Grain
Style: Specialty IPA: New England IPA
Boil Time: 90 min
Batch Size: 50 liters (fermentor volume)
Pre Boil Size: 63.08 liters
Post Boil Size: 55.56 liters
Pre Boil Gravity: 1.069 (recipe based estimate)
Post Boil Gravity: 1.078 (recipe based estimate)
Efficiency: 80% (brew house)
Source: Wolf Pack Brewing
Calories: 1 calories (Per 1.25ml)
Carbs: 0.1 g (Per 1.25ml)
Created: Wednesday September 9th 2020
1.078
1.020
7.6%
29.6
9.8
5.7
22.00
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
12 kg Gladfield - American Ale Malt12 kg American Ale Malt 37.3 2.54 69.6%
1.20 kg Flaked Oats1.2 kg Flaked Oats 33 2.2 7%
1.20 kg Flaked Wheat1.2 kg Flaked Wheat 34 2 7%
1.20 kg Rice Hulls1.2 kg Rice Hulls 0 0 7%
1 kg New Zealand - Gladiator Malt1 kg Gladiator Malt 37.3 5.08 5.8%
0.65 kg New Zealand - Sour Grapes Malt0.65 kg Sour Grapes Malt 34 2.03 3.8%
17.25 kg / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
10 g Citra (11 AA)10 g Citra (11 AA) Hops Pellet 11 First Wort 0 min 5.53 1.4%
10 g Mosaic (12.5 AA)10 g Mosaic (12.5 AA) Hops Pellet 12.5 First Wort 0 min 5.72 1.4%
10 g Simcoe (12.7 AA)10 g Simcoe (12.7 AA) Hops Pellet 12.7 First Wort 0 min 6.39 1.4%
15 g Citra (11 AA)15 g Citra (11 AA) Hops Pellet 11 Whirlpool at 88 °C 40 min 1.32 2.2%
15 g Mosaic (12.5 AA)15 g Mosaic (12.5 AA) Hops Pellet 12.5 Whirlpool at 88 °C 40 min 1.5 2.2%
15 g Simcoe (12.7 AA)15 g Simcoe (12.7 AA) Hops Pellet 12.7 Whirlpool at 88 °C 40 min 1.52 2.2%
35 g Citra (11 AA)35 g Citra (11 AA) Hops Pellet 11 Whirlpool at 82 °C 30 min 2.31 5.1%
35 g Mosaic (12.5 AA)35 g Mosaic (12.5 AA) Hops Pellet 12.5 Whirlpool at 82 °C 30 min 2.63 5.1%
35 g Simcoe (12.7 AA)35 g Simcoe (12.7 AA) Hops Pellet 12.7 Whirlpool at 82 °C 30 min 2.67 5.1%
45 g Citra (11 AA)45 g Citra (11 AA) Hops Pellet 11 Whirlpool at 76 °C 20 min 6.5%
45 g Mosaic (12.5 AA)45 g Mosaic (12.5 AA) Hops Pellet 12.5 Whirlpool at 76 °C 20 min 6.5%
45 g Simcoe (12.7 AA)45 g Simcoe (12.7 AA) Hops Pellet 12.7 Whirlpool at 76 °C 20 min 6.5%
50 g Citra (11 AA)50 g Citra (11 AA) Hops Pellet 11 Dry Hop 6 days 7.2%
50 g Mosaic (12.5 AA)50 g Mosaic (12.5 AA) Hops Pellet 12.5 Dry Hop 6 days 7.2%
50 g Simcoe (12.7 AA)50 g Simcoe (12.7 AA) Hops Pellet 12.7 Dry Hop 6 days 7.2%
75 g Citra (11 AA)75 g Citra (11 AA) Hops Pellet 11 Dry Hop 3 days 10.9%
75 g Mosaic (12.5 AA)75 g Mosaic (12.5 AA) Hops Pellet 12.5 Dry Hop 3 days 10.9%
75 g Simcoe (12.7 AA)75 g Simcoe (12.7 AA) Hops Pellet 12.7 Dry Hop 3 days 10.9%
690 g / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
10 g Calcium Chloride (anhydrous) Water Agt Mash 90 min.
3 g Epsom Salt Water Agt Mash 90 min.
5 g Gypsum Water Agt Mash 90 min.
5 g Table Salt Water Agt Mash 90 min.
5 g Wyeast - Beer Nutrient Other Boil 15 min.
10 g Calcium Chloride (anhydrous) Water Agt Sparge 45 min.
3 g Epsom Salt Water Agt Sparge 45 min.
5 g Gypsum Water Agt Sparge 45 min.
5 g Table Salt Water Agt Sparge 45 min.
 
Yeast
Wyeast - London Ale III 1318
Amount:
1 Each
Cost:
$ 22.00 / each
$ 22.00
Attenuation (avg):
73%
Flocculation:
High
Optimum Temp:
18 - 23 °C
Starter:
Yes
Fermentation Temp:
19 °C
Pitch Rate:
0.5 (M cells / ml / ° P) 472 B cells required
$ 22.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 2.01 bar       Temp: 20 °C       CO2 Level: 2.6 Volumes
 
Target Water Profile
Hazy IPA
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
100 5 45 200 100 25
Use Epsom Salt, calcium chloride and calcium sulfate additions to adjust water profile to about 175–200 ppm chloride, 75–100 ppm sulfate, and 125–150 ppm calcium.
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
52 L Strike 69 °C 67 °C 90 min
40 L Sparge 76 °C 76 °C 45 min
Starting Mash Thickness: 3 L/kg
Starting Grain Temp: 18 °C
Quick Water Requirements
Water Liters
WARNING: Boil kettle capacity (45.4 L) exceeded. Volume required: 60.13 L. Suggest reducing initial water volume to 45.4 L and adding 14.73 L sparge/top-off.  
WARNING: Mash tun capacity exceeded. Volume required: 63.14 L. Suggest reducing strike water volume to 34.02 L and adding 17.74 L sparge/top-off. 51.8
Strike water volume at mash thickness of 3 L/kg 51.8
Mash volume with grains 63.1
Grain absorption losses -17.3
Remaining sparge water volume (equipment estimates 26.5 L) 29.5
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 60.1 L) 63.1
Boil off losses -8.6
Hops absorption losses (first wort, boil, aroma) -0.2
Post boil Volume (equipment estimates 51.4 L) 55.6
Hops absorption losses (whirlpool, hop stand) -1.4
WARNING: Exceeded batch size - reduce boil size  
Going into fermentor (equipment estimates 54.1 L) 50
Total: 81.2  
Equipment Profile Used: System Default
 
Notes

https://beerandbrewing.com/7FW4kwQBtmoQEuk8oU4oYG/article/weldwerks-brewing-co-juicy-bits-new-england-style-ipa

Mash at 149°F (65°C) for 60 minutes or until conversion is complete. Add half of the water salt additions to the mash and the rest at sparge. Add the FWH hops during runoff, immediately after vorlauf, and allow them to steep in the hot wort as the mash is sparged.

Boil for 90 minutes. Whirlpool for 40 minutes (from start to rest) following the hops schedule.

Pitch the yeast and ferment at 67°F (19°C) for 2–3 days, then allow the temperature to rise slowly to 73°F (23°C) by the end of fermentation to ensure full attenuation. When fermentation reaches 1.5–2° Plato from terminal gravity (1.020–1.022), add the first dry-hop addition. About 3 days later, add the second dry-hop addition for another 3 days.
Dump sediment before 2nd dry hop and after cold crash.
Package at 2.6 volumes of CO2 and consume fresh.

Last Updated and Sharing
 
1,176
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-10-09 19:47 UTC
  • Snapshot Created: 2020-09-09 17:52 UTC
  • Link To Parent Recipe