- Joined
- Jan 7, 2018
- Messages
- 31
- Reaction score
- 35
- Points
- 18
I was taken by the idea of making my own one of these tilty wifi hydrometers when I realised the kit of parts was available with instructions on Ebay for just £30. It's been a great distraction on a lockdown Sunday and I've got it working, although not calibrated yet.
I can see the live readout of angle and temperature using the browser interface and I can set up the Ubidots account to send the data. The ubidots page then shows a data point, but no more. If I reboot the iSpindel it then sends another datapoint to Ubidots but once again, no more. I've tried sending frequencies of 20 seconds and 60 seconds.
I installed firmware version 6.4.1 as that was the latest one. Could this be the problem (too new)? Anyone had something similar?
Thanks in advance.
I can see the live readout of angle and temperature using the browser interface and I can set up the Ubidots account to send the data. The ubidots page then shows a data point, but no more. If I reboot the iSpindel it then sends another datapoint to Ubidots but once again, no more. I've tried sending frequencies of 20 seconds and 60 seconds.
I installed firmware version 6.4.1 as that was the latest one. Could this be the problem (too new)? Anyone had something similar?
Thanks in advance.