Calc's not using my profile info

Discussion in 'Beginners Brewing Forum' started by Todd Macom, Mar 20, 2020.

  1. Todd Macom

    Todd Macom New Member

    Joined:
    Mar 15, 2020
    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    I set up my equipment info but the calculations brewersfriend is using does not account for them. For instance I have 1 gallon below my false bottom, herms coil and hoses. I have 4qts set in my equipment "lauder dead space" using 10lbs grain at 1.6qt/lb it's telling me I need 4 gal strike water, should be 5 right? It is also not using the boil evap rate I put in, it is coming up with a value but not one that is in my equipment profile
     
  2. Craigerrr

    Craigerrr Well-Known Member

    Joined:
    Mar 14, 2018
    Messages:
    4,701
    Likes Received:
    6,900
    Trophy Points:
    113
    When you are in recipe edit mode there is a button called "more" next to the stats, click that, then scroll down to equipment profile, and select the profile you created. Next, save the recipe.
    See if that does the trick.
     

Share This Page

arrow_white